The Revent ONE39-E Convection Oven
The Revent ONE39-E brings rack oven crust and color to a cabinet 46.9 in. wide, which is why it lands in supermarket bake-off corners, cafes, and small retail bakeries that cannot give up the floor a roll-in model needs. Eight 18 in. x 26 in. pans rotate through the round chamber at 4 in. spacing across a 95 to 572°F range, enough to keep a pastry case filled through the morning and hearth loaves cycling after it. Rotation plus a steam burst separates this oven from a standard convection oven, which matches neither the even color nor the shine. Eight pans per cycle is the working limit, so a shop baking several full racks an hour is better served by a floor-height rack oven. It sits flush to a wall on a level non-combustible surface with service handled from the front, under an exhaust hood interlocked with the oven.
Round Baking Chamber with RTCC Convection Control
A round chamber wraps the rotating pans in the smallest possible envelope of heated air, so energy goes into product instead of empty corners. Round Total Convection Control steers that airflow so the top pan and the bottom pan finish with the same color, and rotation finishes the job by moving every pan through the same heat. Reduced weight loss during the bake means each batch keeps more of the weight you sell.
RHVS High Volume Steam System
The Round High Volume Steam system delivers 0.26 gallons of steam in 20 seconds at 482°F, the burst that gives baguettes their oven spring and shine. Its non-corrosive circuit stands up to daily steaming without the rust streaks that shorten the life of a cheaper generator, and the whole system stays simple to strip down and clean.
GIAC Touch Control Panel with Four-Product Alarms
The GIAC touch panel sits at an angle you can read from the bench, and it is self-instructive, so a part-time baker can pull up a setting and start without the manual. Four separate product alarms track four bakes at once, which covers croissants on the upper pans and muffins on the lower ones. That matters on a mini oven, where one cycle often carries the whole morning case.
Sliding Door for Tight Aisles
The door slides instead of swinging, so no hot panel sweeps across the aisle during a pan change. Compare that with a hinged convection oven door, which needs a clear arc in front of it and turns a narrow aisle into a queue at the rush. Sliding action also keeps the loading opening clear while you work a peel or a pan rack in and out.
Stand, Proofer, and Retarder Base Options
Mount the oven on a stand base at 34, 22, or 13 in. height, or set it on a proofer base or proofer/retarder base that turns the same footprint into a complete bake-off station. Choosing a proofer base changes the electrical load, from 43 A on the oven alone to 49 A for the pair on a 208-220 V three phase supply, so size the circuit for the configuration you order. Water arrives through a 1/2 in. cold line at 35 to 45 PSI from the oven roof, and a proofer base adds its own 1/2 in. NPT supply and a 1 1/2 in. NPT drain.
Features & Benefits
-
Mini rotating rack oven for supermarket bake-off, cafe, and small retail bakery production
-
Eight 18 in. x 26 in. pans rotating at 4 in. spacing for full pastry and hearth loaf trays
-
Round Total Convection Control (RTCC) airflow for even color pan to pan
-
Rotation that moves every pan through the same heat during the bake
-
Round High Volume Steam (RHVS) burst for oven spring and glossy crust
-
Non-corrosive steam circuit that strips down for cleaning
-
Angled, self-instructive GIAC touch control panel
-
Four-product alarm tracking for mixed loads
-
Sliding door that keeps aisles clear during pan changes
-
Round chamber that minimizes heated air volume
-
Stand bases at 34, 22, or 13 in. plus proofer and proofer/retarder base options
-
Splits into two sections to pass a 34 in. wide opening during installation
-
Installs flush against a wall with service access from the front
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Revent ONE39-E Convection Oven
The Revent ONE39-E brings rack oven crust and color to a cabinet 46.9 in. wide, which is why it lands in supermarket bake-off corners, cafes, and small retail bakeries that cannot give up the floor a roll-in model needs. Eight 18 in. x 26 in. pans rotate through the round chamber at 4 in. spacing across a 95 to 572°F range, enough to keep a pastry case filled through the morning and hearth loaves cycling after it. Rotation plus a steam burst separates this oven from a standard convection oven, which matches neither the even color nor the shine. Eight pans per cycle is the working limit, so a shop baking several full racks an hour is better served by a floor-height rack oven. It sits flush to a wall on a level non-combustible surface with service handled from the front, under an exhaust hood interlocked with the oven.
Round Baking Chamber with RTCC Convection Control
A round chamber wraps the rotating pans in the smallest possible envelope of heated air, so energy goes into product instead of empty corners. Round Total Convection Control steers that airflow so the top pan and the bottom pan finish with the same color, and rotation finishes the job by moving every pan through the same heat. Reduced weight loss during the bake means each batch keeps more of the weight you sell.
RHVS High Volume Steam System
The Round High Volume Steam system delivers 0.26 gallons of steam in 20 seconds at 482°F, the burst that gives baguettes their oven spring and shine. Its non-corrosive circuit stands up to daily steaming without the rust streaks that shorten the life of a cheaper generator, and the whole system stays simple to strip down and clean.
GIAC Touch Control Panel with Four-Product Alarms
The GIAC touch panel sits at an angle you can read from the bench, and it is self-instructive, so a part-time baker can pull up a setting and start without the manual. Four separate product alarms track four bakes at once, which covers croissants on the upper pans and muffins on the lower ones. That matters on a mini oven, where one cycle often carries the whole morning case.
Sliding Door for Tight Aisles
The door slides instead of swinging, so no hot panel sweeps across the aisle during a pan change. Compare that with a hinged convection oven door, which needs a clear arc in front of it and turns a narrow aisle into a queue at the rush. Sliding action also keeps the loading opening clear while you work a peel or a pan rack in and out.
Stand, Proofer, and Retarder Base Options
Mount the oven on a stand base at 34, 22, or 13 in. height, or set it on a proofer base or proofer/retarder base that turns the same footprint into a complete bake-off station. Choosing a proofer base changes the electrical load, from 43 A on the oven alone to 49 A for the pair on a 208-220 V three phase supply, so size the circuit for the configuration you order. Water arrives through a 1/2 in. cold line at 35 to 45 PSI from the oven roof, and a proofer base adds its own 1/2 in. NPT supply and a 1 1/2 in. NPT drain.
Features & Benefits
-
Mini rotating rack oven for supermarket bake-off, cafe, and small retail bakery production
-
Eight 18 in. x 26 in. pans rotating at 4 in. spacing for full pastry and hearth loaf trays
-
Round Total Convection Control (RTCC) airflow for even color pan to pan
-
Rotation that moves every pan through the same heat during the bake
-
Round High Volume Steam (RHVS) burst for oven spring and glossy crust
-
Non-corrosive steam circuit that strips down for cleaning
-
Angled, self-instructive GIAC touch control panel
-
Four-product alarm tracking for mixed loads
-
Sliding door that keeps aisles clear during pan changes
-
Round chamber that minimizes heated air volume
-
Stand bases at 34, 22, or 13 in. plus proofer and proofer/retarder base options
-
Splits into two sections to pass a 34 in. wide opening during installation
-
Installs flush against a wall with service access from the front
Resources & Downloads
See all from Revent
Specifications
| Maximum Heat Capacity | 15.6 kW |
| Temperature Range | 95 to 572°F |
| Pan Capacity | 8 pans |
| Maximum Pan Size | 18 in. x 26 in. |
| Pan Spacing | 4 in. |
| Steam Generation | 0.26 gal per 20 sec at 482°F |
| Standard Electrical | 208-220 V, 3 Phase + N, 43 A |
| Optional Electrical | 440-480 V, 3 Phase, 23 A; 120 V, 15 A |
| Electrical with Proofer Base | 208-220 V, 3 Phase + N, 49 A |
| Optional with Proofer Base | 440-480 V, 3 Phase, 27 A |
| Water Supply | 1/2 in., 35 to 45 PSI, cold |
| Drain | 1/2 in. dia. |
| Proofer Base Water Supply | 1/2 in. NPT, 35 to 45 PSI, cold |
| Proofer Base Drain | 1 1/2 in. NPT |
| Air Inlet | 3.4 in. dia. |
| Canopy Vent | 6 in. connection, 353 CFM evacuation |
| Overall Height on Stand | 89.3 in. |
| Overall Width | 46.9 in. |
| Body Depth | 39.6 in. |
| Overall Depth with Canopy | 49.2 in. |
| Door Opening | 23.5 in. W x 38.2 in. H |
| Swing Diameter | 32.7 in. |
| Minimum Intake Opening, Assembled | 52 in. x 57 in. |
| Minimum Intake Opening, Split | 34 in. x 47 in. |
| Stand Base Heights | 34, 22, or 13 in. |
| Height with Stand S | 71.9 in. |
| Height with Stand L | 93.2 in. |
| Height with Proofer Base | 93.2 in. |
| Water Hardness | 4.0 to 7.0 dH |
| Water pH | 7.5 to 8.5 |
| Magnesium | Less than 30 mg/l |
| Calcium | 20 to 100 mg/l |
| Alkalinity | Greater than 60 mg/l |
| Chlorides | Less than 10 mg/l |
| Conductivity | 200 to 800 mS/cm |
| Construction | Stainless steel |
| Steam System | Non-corrosive |
| Weight | 660 lb |
| Shipping Weight | 880 lb |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
-
ETL US & Canada

