Skip to content

Revent P108-144 57 In. Two Rack Roll-In Proofer, Two Door Cabinet, Electromagnetic Steam Generator, PID Touchscreen Climate Controls

SKUP108-144 PROOFER BrandRevent

The Revent P108-144 PROOFER Roll-In Proofer

The Revent P108-144 is a two door roll-in proofer for two single racks or one double rack, sized for supermarket in-store bakeries and retail shops that proof on the same racks their oven bakes from. Two doors on a 57 in. cabinet mean one rack can leave for the oven while its neighbor keeps proving behind a closed door, which is the difference between a staggered bake-off and a stalled one. Climate is held by PID regulation working with a 200 step fan, so dough surfaces stay supple instead of skinning over while a rack waits its turn. This cabinet proofs only and has no refrigeration stage, so an overnight retard schedule calls for a retarding cabinet instead. Plan on a level floor, 2 in. of wall clearance, a cold water line, a drain, and a three phase electrical supply.

Two Single Racks or One Double Rack Behind Two Doors

Behind two full-height doors the chamber takes two side load single racks at 28.5 in. x 18 in., two end load single racks at 26 in. x 20.5 in., or one 36 in. x 28.5 in. double rack. Loaded racks roll through a 48 in. wide by 76.7 in. high opening without lifting a wheel or tipping a pan. Cabinet dimensions are 57 in. across and 42.5 in. deep, with the climate unit adding 10 in. behind that and carrying the assembly to 100 in. tall. Ceiling height is the figure worth checking first, since the 76.7 in. door opening clears most bakeries while the 100 in. overall does not.

Electromagnetic Steam Generator with Automatic Drain

Humidity comes from an electromagnetic steam generator built without mechanical or electrical parts inside the steam container, a different arrangement from element style generators that sit their heaters in the same water that scales them. The tank mounts externally with open access for cleaning, and minerals stay out of the proofing chamber instead of settling on rack wheels and pan edges. An automatic drain empties the generator at the end of a session, so nothing stands in it overnight. Steam enters through a nozzle placed after the fan and the heating elements, which blends moisture into moving air rather than laying it down as wet spots on the closest tray of rolls.

Touchscreen Panel with PID Climate Regulation

Setting and display for temperature and humidity live on one programmable touch screen, so the opening baker keys a program rather than nursing two dials toward a target. PID regulation then trims heat and moisture continuously, and Revent ties it to a computer controlled fan that steps across 200 speeds. Slow air is what laminated dough wants while its butter layers are still soft, and the same control curve keeps small pieces and large pieces proofing together in one load. The result Revent engineers for is smooth proving with minimal dehydration and none of the skinned over dough that turns up hours later as dull crust.

Stainless Steel Cabinet with Double Pane Windows

Stainless steel covers the interior and the exterior, so the cabinet washes down on the same schedule as the rest of your bakery without special treatment. Double pane glass and an LED interior light let a baker read proof height from the aisle instead of cracking a door and dropping the chamber's humidity onto the floor. Cold water systems that admit water straight into the chamber carry a bacteria risk this design avoids by generating steam outside the box. A stainless floor is available as a factory option when the base needs to match the rest of the cabinet.

Sectional Assembly and Utility Connections

The cabinet is assembled on site in sections, so it can come through an opening as narrow as 35 in. rather than needing a doorway as wide as the finished box. Installation asks for a level floor, at least 2 in. of clearance from any wall, and the front and top left open for access and ventilation. Water arrives cold through a 1/2 in. NPT connection held at 35 to 45 PSI. Drainage is a 1 1/2 in. NPT line, and the circuit is 208-220 V three phase at 16 A. Chemistry matters to the steam system, so Revent asks for pH of 7 to 8.5, hardness of 4 to 7 grains per gallon, chloride no higher than 50 ppm, and conductivity of 200 to 800 µS/cm at 59°F.

Features & Benefits

  1. Roll-in proofing for supermarket in-store bakeries and retail shops running a rack oven
  2. Room for a double rack when one tall rack takes the place of two singles
  3. Two full-height doors so one rack can leave for the oven while the other keeps proving
  4. Electromagnetic steam generator that keeps mechanical and powered parts out of the steam container
  5. External steam tank positioned for easy cleaning access
  6. Automatic drain that empties the steam generator between sessions
  7. Steam nozzle mounted after the fan and temperature elements for evenly blended humidity
  8. Programmable touchscreen panel for temperature and humidity setting and display
  9. PID regulation that holds chamber climate at the programmed setpoints
  10. Automatic computer controlled fan with 200 speed steps
  11. Smooth proving with minimal dehydration and no skinned over dough surface
  12. Small and large dough pieces proofed together in the same load
  13. Wipe-down stainless surfaces inside and out for daily bakery sanitation
  14. Double pane glass viewing window with LED interior lighting
  15. Optional stainless floor for a finished base

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$16,824.50
  • Roll-in proofing for supermarket in-store bakeries and retail shops running a rack oven
  • Room for a double rack when one tall rack takes the place of two singles
  • Two full-height doors so one rack can leave for the oven while the other keeps proving
  • Electromagnetic steam generator that keeps mechanical and powered parts out of the steam container
  • External steam tank positioned for easy cleaning access
  • See full feature list

    The Revent P108-144 PROOFER Roll-In Proofer

    The Revent P108-144 is a two door roll-in proofer for two single racks or one double rack, sized for supermarket in-store bakeries and retail shops that proof on the same racks their oven bakes from. Two doors on a 57 in. cabinet mean one rack can leave for the oven while its neighbor keeps proving behind a closed door, which is the difference between a staggered bake-off and a stalled one. Climate is held by PID regulation working with a 200 step fan, so dough surfaces stay supple instead of skinning over while a rack waits its turn. This cabinet proofs only and has no refrigeration stage, so an overnight retard schedule calls for a retarding cabinet instead. Plan on a level floor, 2 in. of wall clearance, a cold water line, a drain, and a three phase electrical supply.

    Two Single Racks or One Double Rack Behind Two Doors

    Behind two full-height doors the chamber takes two side load single racks at 28.5 in. x 18 in., two end load single racks at 26 in. x 20.5 in., or one 36 in. x 28.5 in. double rack. Loaded racks roll through a 48 in. wide by 76.7 in. high opening without lifting a wheel or tipping a pan. Cabinet dimensions are 57 in. across and 42.5 in. deep, with the climate unit adding 10 in. behind that and carrying the assembly to 100 in. tall. Ceiling height is the figure worth checking first, since the 76.7 in. door opening clears most bakeries while the 100 in. overall does not.

    Electromagnetic Steam Generator with Automatic Drain

    Humidity comes from an electromagnetic steam generator built without mechanical or electrical parts inside the steam container, a different arrangement from element style generators that sit their heaters in the same water that scales them. The tank mounts externally with open access for cleaning, and minerals stay out of the proofing chamber instead of settling on rack wheels and pan edges. An automatic drain empties the generator at the end of a session, so nothing stands in it overnight. Steam enters through a nozzle placed after the fan and the heating elements, which blends moisture into moving air rather than laying it down as wet spots on the closest tray of rolls.

    Touchscreen Panel with PID Climate Regulation

    Setting and display for temperature and humidity live on one programmable touch screen, so the opening baker keys a program rather than nursing two dials toward a target. PID regulation then trims heat and moisture continuously, and Revent ties it to a computer controlled fan that steps across 200 speeds. Slow air is what laminated dough wants while its butter layers are still soft, and the same control curve keeps small pieces and large pieces proofing together in one load. The result Revent engineers for is smooth proving with minimal dehydration and none of the skinned over dough that turns up hours later as dull crust.

    Stainless Steel Cabinet with Double Pane Windows

    Stainless steel covers the interior and the exterior, so the cabinet washes down on the same schedule as the rest of your bakery without special treatment. Double pane glass and an LED interior light let a baker read proof height from the aisle instead of cracking a door and dropping the chamber's humidity onto the floor. Cold water systems that admit water straight into the chamber carry a bacteria risk this design avoids by generating steam outside the box. A stainless floor is available as a factory option when the base needs to match the rest of the cabinet.

    Sectional Assembly and Utility Connections

    The cabinet is assembled on site in sections, so it can come through an opening as narrow as 35 in. rather than needing a doorway as wide as the finished box. Installation asks for a level floor, at least 2 in. of clearance from any wall, and the front and top left open for access and ventilation. Water arrives cold through a 1/2 in. NPT connection held at 35 to 45 PSI. Drainage is a 1 1/2 in. NPT line, and the circuit is 208-220 V three phase at 16 A. Chemistry matters to the steam system, so Revent asks for pH of 7 to 8.5, hardness of 4 to 7 grains per gallon, chloride no higher than 50 ppm, and conductivity of 200 to 800 µS/cm at 59°F.

    Features & Benefits

    1. Roll-in proofing for supermarket in-store bakeries and retail shops running a rack oven
    2. Room for a double rack when one tall rack takes the place of two singles
    3. Two full-height doors so one rack can leave for the oven while the other keeps proving
    4. Electromagnetic steam generator that keeps mechanical and powered parts out of the steam container
    5. External steam tank positioned for easy cleaning access
    6. Automatic drain that empties the steam generator between sessions
    7. Steam nozzle mounted after the fan and temperature elements for evenly blended humidity
    8. Programmable touchscreen panel for temperature and humidity setting and display
    9. PID regulation that holds chamber climate at the programmed setpoints
    10. Automatic computer controlled fan with 200 speed steps
    11. Smooth proving with minimal dehydration and no skinned over dough surface
    12. Small and large dough pieces proofed together in the same load
    13. Wipe-down stainless surfaces inside and out for daily bakery sanitation
    14. Double pane glass viewing window with LED interior lighting
    15. Optional stainless floor for a finished base

    See all from Revent

    Specifications

    Rack Capacity2 single racks or 1 double rack
    Side Load Single Rack Size28.5 in. x 18 in.
    End Load Single Rack Size26 in. x 20.5 in.
    Double Rack Size36 in. x 28.5 in.
    Exterior Width57 in.
    Cabinet Depth42.5 in.
    Rear Climate Unit Projection10 in.
    Cabinet Height76.7 in.
    Overall Height100 in.
    Doorway Opening48 in. x 76.7 in.
    Minimum Intake Opening35 in. wide
    Electrical208-220 V, 3 Phase + N, 16 A
    Weight1,090 lb
    Shipping Weight1,140 lb
    Water Supply1/2 in. NPT, 35 to 45 PSI, cold
    Drain1 1/2 in. NPT
    Water pH7 to 8.5
    Water Hardness4 to 7 gr per gal
    Chloride Concentration0 to 50 ppm
    Water Conductivity200 to 800 µS/cm at 59°F
    ConstructionStainless steel interior and exterior
    Minimum Wall Clearance2 in.

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 1 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved
    • CETLUS
      ETL US & Canada

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Revent P108-144 PROOFER Roll-In Proofer

    About Proofing & Holding Cabinets

    A commercial proofing and holding cabinet is an insulated, heated cabinet with two jobs. As a proofer cabinet, it holds bread and pastry dough at the warm humid temperature needed for the final rise. As a commercial holding cabinet, it holds prepared hot food at safe serving temperature. Bakeries use these as bread proofing cabinets through the final rise before baking. Restaurants, catering kitchens, and cafeterias use them to hold cooked food at 140°F or above between production and service. Many cabinets in this collection do both jobs in one unit.

    The right commercial proofing and holding cabinet depends on your kitchen volume, the products you are holding, and whether you need proofing capability. Proofer-only models run at warm temperatures with humidity for dough. Holding-only models run at higher temperatures for cooked food. Combination models switch between the two for kitchens that need both.

    Every cabinet in this collection is electric and built for daily commercial use. Common configurations, buying guidance, and the questions buyers ask most often follow below.

    Common Types and Configurations

    • Combination proofing and holding cabinet: Single unit that switches between proofing dough and holding hot food. The most common format in this collection. Useful for bakeries that also serve hot prepared items.
    • Holding cabinet: Heated cabinet for cooked food only, no proofing function. Common in restaurant and catering kitchens that don't bake on-site.
    • Insulated cabinet: Better temperature stability and lower energy use. The standard choice for most commercial operations.
    • Non-insulated cabinet: Lower purchase cost. For lower-volume use or operations where the cabinet runs only during shifts.
    • Full size or half size: Full size cabinets accommodate full sheet pans (18 by 26 inches). Half size models fit smaller spaces and use half-size pans.
    • Undercounter cabinet: Compact unit that fits below a prep counter. For tight kitchens where floor-standing units would block the line.
    • Clear door or solid door: Clear door lets staff check product without opening the cabinet, reducing heat loss. Solid door holds temperature slightly better.

    What to Look at Before You Buy

    • Temperature range: Catalog units run between 80 and 207°F at the cabinet interior. Confirm the unit you pick covers both your proofing range (80 to 110°F) and your holding range (140°F or above) if you need both functions.
    • Pan capacity: Match the cabinet to your peak production. Common sizes range from 8 pans up to 24 pans. Half-size pan slots double the count for smaller pans.
    • Humidity control: Required for proofing dough. Several models in the catalog include humidity control. Holding-only operations do not need it.
    • Insulated vs non-insulated: Insulated cabinets hold temperature longer with less energy and are the standard choice. Non-insulated saves on purchase price for lower-volume use.
    • Door style: Clear door for visual product checks; solid door for slightly better temperature retention. Tempered glass is standard on modern clear-door units.
    • Voltage: Most cabinets run on 120V single-phase. Larger or higher-output units run on 208 to 240V. Check the spec sheet before ordering.
    • Mobile or floor mount: Mobile units roll between the bakery and the front of the line. Floor-mount units sit in fixed kitchen positions.

    Frequently Asked Questions

    What is the difference between a proofing cabinet and a holding cabinet?

    A proofing cabinet holds bread and pastry dough at warm humid temperatures (typically 80 to 110°F with controlled humidity) so yeast can complete the final rise before baking. A holding cabinet holds already-cooked food at safe serving temperature (140°F or above) between production and service. The two functions need different temperature ranges and different humidity levels. Combination cabinets do both jobs by switching modes, which is why most cabinets in this collection are dual-purpose proofing and holding units.

    What temperature should a heated holding cabinet hold?

    The US Food Code requires hot food to be held at 135°F or above to prevent bacterial growth in the temperature danger zone. Most commercial heated holding cabinets are set between 140 and 180°F at the cabinet interior. Cabinets in this collection support temperature ranges up to 207°F for higher-temp holding needs. Match the setpoint to the food you are holding: meats and gravies hold at 140 to 160°F; baked goods and breakfast items hold cooler, around 140 to 150°F.

    What is a combination proofing and holding cabinet used for?

    A combination cabinet switches between proofing dough and holding hot food, which lets one piece of equipment cover two distinct kitchen needs. Bakeries with full menus use it to proof bread and pastry overnight, then hold prepared breakfast items the next morning. Restaurants with in-house bread programs use it to proof rolls during prep, then hold hot side dishes during dinner service. The combination format saves floor space and capital cost compared to buying separate proofing and holding units.

    Related Categories

    Shop by Brand

    Product Features

    1. Roll-in proofing for supermarket in-store bakeries and retail shops running a rack oven
    2. Room for a double rack when one tall rack takes the place of two singles
    3. Two full-height doors so one rack can leave for the oven while the other keeps proving
    4. Electromagnetic steam generator that keeps mechanical and powered parts out of the steam container
    5. External steam tank positioned for easy cleaning access
    6. Automatic drain that empties the steam generator between sessions
    7. Steam nozzle mounted after the fan and temperature elements for evenly blended humidity
    8. Programmable touchscreen panel for temperature and humidity setting and display
    9. PID regulation that holds chamber climate at the programmed setpoints
    10. Automatic computer controlled fan with 200 speed steps
    11. Smooth proving with minimal dehydration and no skinned over dough surface
    12. Small and large dough pieces proofed together in the same load
    13. Wipe-down stainless surfaces inside and out for daily bakery sanitation
    14. Double pane glass viewing window with LED interior lighting
    15. Optional stainless floor for a finished base

    See all from Revent

    Specifications

    Rack Capacity2 single racks or 1 double rack
    Side Load Single Rack Size28.5 in. x 18 in.
    End Load Single Rack Size26 in. x 20.5 in.
    Double Rack Size36 in. x 28.5 in.
    Exterior Width57 in.
    Cabinet Depth42.5 in.
    Rear Climate Unit Projection10 in.
    Cabinet Height76.7 in.
    Overall Height100 in.
    Doorway Opening48 in. x 76.7 in.
    Minimum Intake Opening35 in. wide
    Electrical208-220 V, 3 Phase + N, 16 A
    Weight1,090 lb
    Shipping Weight1,140 lb
    Water Supply1/2 in. NPT, 35 to 45 PSI, cold
    Drain1 1/2 in. NPT
    Water pH7 to 8.5
    Water Hardness4 to 7 gr per gal
    Chloride Concentration0 to 50 ppm
    Water Conductivity200 to 800 µS/cm at 59°F
    ConstructionStainless steel interior and exterior
    Minimum Wall Clearance2 in.

    Manufacturer's Warranty

      1 year

      Labor

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch