The Sealer Sales FR-770I-counter Band Sealer
The Sealer Sales FR-770I-counter is a stainless steel continuous band sealer, the horizontal left-to-right feeding FR-770I with the factory-installed digital counter add-on. The FR-770 is one of the most popular band sealers in its class because it handles 20 to 26 six-inch wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and feeds left to right (the mirror configuration of the right-feed CBS-880 family). Stainless construction and a long spare-parts pipeline make it a workhorse you can keep in service for years.
Left-to-Right Feed
The FR-770I-counter is the left-feed version of the FR-770 chassis. The operator stands at the left side of the conveyor and bags exit to the right. This is the mirror configuration of the right-feed CBS-880 family. Match feed direction to your production line layout so the operator does not have to reach across the conveyor.
10 mm Seal Width with Solid-State Temperature Control
A 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films. The FR-770I-counter keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.
Built for Daily Production
Frame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you do not pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.
Spare Parts and Field Service
The FR-770 family has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer.
Digital Counter for Production Tracking
The FR-770I-counter adds a factory-installed digital counter to the standard FR-770I. Each sealed bag increments the counter so you can confirm batch counts at the end of a shift without manually tallying or pulling bags off a pallet to recount. The counter resets at the front panel.
Embossing on the Seal Line
The FR-770I-counter includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.
Configurable for Your Line
For facilities that need more than the standard configuration, the FR-770I-counter can be ordered with an alternate 15 mm seal width, a smooth or serrated seal wheel in place of the embossing wheel, a stainless steel floor stand (horizontal units only), an extended vertical height kit raising filled bag range to 12-16 inches (vertical units only). These options are factory-fitted when you place the order.
Features & Benefits
-
For production lines packaging 20 to 26 six-inch wide thermoplastic bags per minute
-
10 mm seal width on PE, PP, and laminated foils
-
Factory-installed digital counter increments on each sealed bag, resets at the front panel
-
Horizontal conveyor, feeds left to right
-
Stainless steel chassis and motorized rubber conveyor with adjustable speed
-
Solid-state temperature controller holds seal bars at setpoint for consistent seal quality
-
Knurled pressure wheels with variable adjustment compensate for film thickness
-
One pair each of cooling and heating blocks for fully cooled exit
-
Includes embossing wheel for ink-free text on the seal line
-
Emergency stop button on front panel
-
Manufacturer's spare parts kit includes PTFE sealing belt, drive belt, PC board, tools, and typesets (0-9 and letters EXD)
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
For production lines packaging 20 to 26 six-inch wide thermoplastic bags per minute
10 mm seal width on PE, PP, and laminated foils
Factory-installed digital counter increments on each sealed bag, resets at the front panel
Horizontal conveyor, feeds left to right
Stainless steel chassis and motorized rubber conveyor with adjustable speed
The Sealer Sales FR-770I-counter Band Sealer
The Sealer Sales FR-770I-counter is a stainless steel continuous band sealer, the horizontal left-to-right feeding FR-770I with the factory-installed digital counter add-on. The FR-770 is one of the most popular band sealers in its class because it handles 20 to 26 six-inch wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and feeds left to right (the mirror configuration of the right-feed CBS-880 family). Stainless construction and a long spare-parts pipeline make it a workhorse you can keep in service for years.
Left-to-Right Feed
The FR-770I-counter is the left-feed version of the FR-770 chassis. The operator stands at the left side of the conveyor and bags exit to the right. This is the mirror configuration of the right-feed CBS-880 family. Match feed direction to your production line layout so the operator does not have to reach across the conveyor.
10 mm Seal Width with Solid-State Temperature Control
A 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films. The FR-770I-counter keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.
Built for Daily Production
Frame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you do not pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.
Spare Parts and Field Service
The FR-770 family has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer.
Digital Counter for Production Tracking
The FR-770I-counter adds a factory-installed digital counter to the standard FR-770I. Each sealed bag increments the counter so you can confirm batch counts at the end of a shift without manually tallying or pulling bags off a pallet to recount. The counter resets at the front panel.
Embossing on the Seal Line
The FR-770I-counter includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.
Configurable for Your Line
For facilities that need more than the standard configuration, the FR-770I-counter can be ordered with an alternate 15 mm seal width, a smooth or serrated seal wheel in place of the embossing wheel, a stainless steel floor stand (horizontal units only), an extended vertical height kit raising filled bag range to 12-16 inches (vertical units only). These options are factory-fitted when you place the order.
Features & Benefits
-
For production lines packaging 20 to 26 six-inch wide thermoplastic bags per minute
-
10 mm seal width on PE, PP, and laminated foils
-
Factory-installed digital counter increments on each sealed bag, resets at the front panel
-
Horizontal conveyor, feeds left to right
-
Stainless steel chassis and motorized rubber conveyor with adjustable speed
-
Solid-state temperature controller holds seal bars at setpoint for consistent seal quality
-
Knurled pressure wheels with variable adjustment compensate for film thickness
-
One pair each of cooling and heating blocks for fully cooled exit
-
Includes embossing wheel for ink-free text on the seal line
-
Emergency stop button on front panel
-
Manufacturer's spare parts kit includes PTFE sealing belt, drive belt, PC board, tools, and typesets (0-9 and letters EXD)
Resources & Downloads
See all from Sealer Sales
Specifications
| Specification | Detail |
|---|---|
| Power | 110V / 60Hz |
| Motor / Sealing Power | 50W / 300W x 2 |
| Sealing Speed | 0-630"/min |
| Seal Width | 10MM |
| Temperature Range | 0-300°C |
| Conveyor Size | 38" x 7" |
| Max. Conveyor Load | Under 22-lbs |
| Character Size | 3 x 4 x 9mm |
| Optional Embossing | 1 Line Embossing (3 sections with 15 characters/line) |
| Dimensions | 33" x 15" x 26" |
| Weight (lbs) | 87 |
| Model # | FR-770I-counter |
| Feed Direction | Left to Right |
| Counter | Yes |
Manufacturer's Warranty
-
6 Month
Labor
-
6 Month
Parts
For production lines packaging 20 to 26 six-inch wide thermoplastic bags per minute