The Serv-Ware BC-65-HC Bottle Cooler
The Serv-Ware BC-65-HC is the horizontal bottle cooler for bars, beverage stations, and concession lines that need cold bottles within arm's reach of the well instead of a back-room walk-in. At about 64 inches wide it drops into a back-bar run or under a service counter, and the bottom-mounted compressor draws cooling air across the cabinet so bottles from the front rail to the back divider hold the same serving temperature through a long shift.
Cold Holding and Airflow
Forced-air cooling moves chilled air across the full 17.2 cu. ft. cabinet, so a freshly restocked row pulls down to the 33°F to 41°F holding band as fast as the bottles already on the line. The self-defrosting evaporator clears frost on a regular cycle, so you are not pulling product to thaw a coil in the middle of service.
Built for the Bar Line
Locking stainless steel sliding doors ride flush along the top so a bartender can reach in without swinging a door into the aisle, and they lock down inventory at close. Adjustable dividers keep brands and bottle sizes sorted and stop rows from toppling when the cooler is half empty, and the mounted bottle cap opener and cap catcher keep service moving and caps off the floor.
Refrigeration System
A R600a charge of 3.53 oz drives a 1/2 HP bottom-mounted compressor, paired with CFC-free foam insulation that holds the cold in and keeps the cabinet walls from sweating. Mounting the compressor low puts the most service-prone part at waist height, so a tech is not lying on the floor to reach it.
Install and Footprint
The cabinet measures 64.3 in. wide by 27 in. deep and stands 35 in. tall, so you can confirm it clears the back-bar opening before it arrives. It runs on 115V single-phase power at 3 amps, and the stainless interior with epoxy coated wire shelves wipes down clean after the spills and sticky mixers that come with bar service.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Bottom-mounted compressor keeps the cooling deck low and bottles cold edge to edge across the cabinet
-
Forced-air cooling circulates chilled air front to back so every bottle holds the same serving temperature
-
Locking stainless steel sliding doors secure inventory at close and slide clear of a busy bar aisle
-
Adjustable dividers sort bottles by brand or size and keep rows upright when the cooler runs low
-
Mounted bottle cap opener and cap catcher speed up service and keep caps off the floor
-
Self-defrosting evaporator clears frost on a regular cycle so you never pull product to thaw a coil
-
Stainless steel interior wipes down fast and shrugs off the dents and rust of daily bar use
-
Black painted steel exterior with a stainless landing edge stands up to spills and bar traffic
-
Epoxy coated wire shelves resist the corrosion that condensation and spilled mixers cause
-
Hydrocarbon R600a refrigerant with CFC-free foam insulation runs efficiently and meets current refrigerant rules
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Bottom-mounted compressor keeps the cooling deck low and bottles cold edge to edge across the cabinet
Forced-air cooling circulates chilled air front to back so every bottle holds the same serving temperature
Locking stainless steel sliding doors secure inventory at close and slide clear of a busy bar aisle
Adjustable dividers sort bottles by brand or size and keep rows upright when the cooler runs low
Mounted bottle cap opener and cap catcher speed up service and keep caps off the floor
The Serv-Ware BC-65-HC Bottle Cooler
The Serv-Ware BC-65-HC is the horizontal bottle cooler for bars, beverage stations, and concession lines that need cold bottles within arm's reach of the well instead of a back-room walk-in. At about 64 inches wide it drops into a back-bar run or under a service counter, and the bottom-mounted compressor draws cooling air across the cabinet so bottles from the front rail to the back divider hold the same serving temperature through a long shift.
Cold Holding and Airflow
Forced-air cooling moves chilled air across the full 17.2 cu. ft. cabinet, so a freshly restocked row pulls down to the 33°F to 41°F holding band as fast as the bottles already on the line. The self-defrosting evaporator clears frost on a regular cycle, so you are not pulling product to thaw a coil in the middle of service.
Built for the Bar Line
Locking stainless steel sliding doors ride flush along the top so a bartender can reach in without swinging a door into the aisle, and they lock down inventory at close. Adjustable dividers keep brands and bottle sizes sorted and stop rows from toppling when the cooler is half empty, and the mounted bottle cap opener and cap catcher keep service moving and caps off the floor.
Refrigeration System
A R600a charge of 3.53 oz drives a 1/2 HP bottom-mounted compressor, paired with CFC-free foam insulation that holds the cold in and keeps the cabinet walls from sweating. Mounting the compressor low puts the most service-prone part at waist height, so a tech is not lying on the floor to reach it.
Install and Footprint
The cabinet measures 64.3 in. wide by 27 in. deep and stands 35 in. tall, so you can confirm it clears the back-bar opening before it arrives. It runs on 115V single-phase power at 3 amps, and the stainless interior with epoxy coated wire shelves wipes down clean after the spills and sticky mixers that come with bar service.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Bottom-mounted compressor keeps the cooling deck low and bottles cold edge to edge across the cabinet
-
Forced-air cooling circulates chilled air front to back so every bottle holds the same serving temperature
-
Locking stainless steel sliding doors secure inventory at close and slide clear of a busy bar aisle
-
Adjustable dividers sort bottles by brand or size and keep rows upright when the cooler runs low
-
Mounted bottle cap opener and cap catcher speed up service and keep caps off the floor
-
Self-defrosting evaporator clears frost on a regular cycle so you never pull product to thaw a coil
-
Stainless steel interior wipes down fast and shrugs off the dents and rust of daily bar use
-
Black painted steel exterior with a stainless landing edge stands up to spills and bar traffic
-
Epoxy coated wire shelves resist the corrosion that condensation and spilled mixers cause
-
Hydrocarbon R600a refrigerant with CFC-free foam insulation runs efficiently and meets current refrigerant rules
Resources & Downloads
See all from Serv-Ware
Specifications
| Width | 64.3" |
| Depth | 27" |
| Height | 35" |
| Shipping Weight | 280 lbs |
| Storage Capacity | 17.2 cu. ft. |
| Temperature Range | 33°F to 41°F |
| Refrigerant | R600a |
| Refrigerant Charge | 3.53 oz |
| Cooling Output | 5400 BTU/h |
| Compressor | 1/2 HP |
| Compressor Location | Bottom-Mounted |
| Cooling Type | Forced-Air |
| Defrost | Self-Defrost |
| Voltage | 115V |
| Amperage | 3 amps |
| Frequency | 60 Hz |
| Phase | Single Phase |
| Interior Material | Stainless Steel |
| Exterior Material | Black Painted Steel |
| Insulation | CFC-Free Foam |
| Shelf Material | Epoxy Coated Wire |
| Doors | Locking Stainless Steel Sliding |
Manufacturer's Warranty
-
3 Year
Labor
-
3 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
Bottom-mounted compressor keeps the cooling deck low and bottles cold edge to edge across the cabinet