The Serv-Ware GFR24 Glass Froster
The Serv-Ware GFR24 is a 24-inch glass and plate froster that chills mugs, glasses, and plates down to -4°F for frosted service at the bar. Forced-air cooling and a bottom-mounted compressor pull the 2.67 cubic foot cabinet cold and hold it there, so a bartender pulls a frosted mug straight from the sliding top through a busy night.
Frosts Glasses And Plates
The froster holds its interior between -4°F and 5°F, cold enough to build a layer of frost on beer mugs, cocktail glasses, and plates for chilled presentation. Forced-air cooling moves the cold evenly around the load so glassware frosts uniformly rather than only near the coil. A lockable sliding top keeps the cold in and the contents secure between grabs.
Capacity And Racks
At 2.67 cubic feet, the cabinet holds a bar's working set of glassware on two shelves plus a bottom rack, keeping frosted mugs staged and ready. The LED interior lamp lights the load so a bartender can see and grab the right glass without digging. The sliding top opens right at the well for a quick reach.
R290 Refrigeration
The bottom-mounted compressor runs on R290, a CFC-free hydrocarbon refrigerant, with an 866 BTU/h system matched to the froster's deep-chill duty. A built-in condensate evaporator handles the meltwater, so there is no floor drain or extra plumbing to run. Automatic defrost every six hours keeps the coil clear without manual attention.
Build And Setup
A black painted steel exterior and stainless steel interior over foamed-in-place polyurethane insulation stand up to a wet bar and hold the deep cold. An electronic thermostat with a digital LED display keeps the temperature set and visible, and the unit ships with wheels installed so it rolls into place and runs off a standard 115-volt outlet.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Chills mugs, glasses, and plates to -4°F for frosted bar service
-
Forced-air cooling frosts glassware evenly, not just near the coil
-
2.67 cubic feet on two shelves plus a bottom rack stages a bar's glassware
-
Lockable sliding top keeps the cold in and the contents secure
-
LED interior lamp lights the load for a fast, correct grab
-
R290 hydrocarbon refrigerant runs the deep-chill system
-
Built-in condensate evaporator means no floor drain or extra plumbing
-
Automatic six-hour defrost keeps the coil clear without attention
-
Black painted steel exterior and stainless steel interior take a wet bar
-
Electronic thermostat with a digital LED display for precise control
-
Ships with wheels installed to roll into place
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Chills mugs, glasses, and plates to -4°F for frosted bar service
Forced-air cooling frosts glassware evenly, not just near the coil
2.67 cubic feet on two shelves plus a bottom rack stages a bar's glassware
Lockable sliding top keeps the cold in and the contents secure
LED interior lamp lights the load for a fast, correct grab
The Serv-Ware GFR24 Glass Froster
The Serv-Ware GFR24 is a 24-inch glass and plate froster that chills mugs, glasses, and plates down to -4°F for frosted service at the bar. Forced-air cooling and a bottom-mounted compressor pull the 2.67 cubic foot cabinet cold and hold it there, so a bartender pulls a frosted mug straight from the sliding top through a busy night.
Frosts Glasses And Plates
The froster holds its interior between -4°F and 5°F, cold enough to build a layer of frost on beer mugs, cocktail glasses, and plates for chilled presentation. Forced-air cooling moves the cold evenly around the load so glassware frosts uniformly rather than only near the coil. A lockable sliding top keeps the cold in and the contents secure between grabs.
Capacity And Racks
At 2.67 cubic feet, the cabinet holds a bar's working set of glassware on two shelves plus a bottom rack, keeping frosted mugs staged and ready. The LED interior lamp lights the load so a bartender can see and grab the right glass without digging. The sliding top opens right at the well for a quick reach.
R290 Refrigeration
The bottom-mounted compressor runs on R290, a CFC-free hydrocarbon refrigerant, with an 866 BTU/h system matched to the froster's deep-chill duty. A built-in condensate evaporator handles the meltwater, so there is no floor drain or extra plumbing to run. Automatic defrost every six hours keeps the coil clear without manual attention.
Build And Setup
A black painted steel exterior and stainless steel interior over foamed-in-place polyurethane insulation stand up to a wet bar and hold the deep cold. An electronic thermostat with a digital LED display keeps the temperature set and visible, and the unit ships with wheels installed so it rolls into place and runs off a standard 115-volt outlet.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Chills mugs, glasses, and plates to -4°F for frosted bar service
-
Forced-air cooling frosts glassware evenly, not just near the coil
-
2.67 cubic feet on two shelves plus a bottom rack stages a bar's glassware
-
Lockable sliding top keeps the cold in and the contents secure
-
LED interior lamp lights the load for a fast, correct grab
-
R290 hydrocarbon refrigerant runs the deep-chill system
-
Built-in condensate evaporator means no floor drain or extra plumbing
-
Automatic six-hour defrost keeps the coil clear without attention
-
Black painted steel exterior and stainless steel interior take a wet bar
-
Electronic thermostat with a digital LED display for precise control
-
Ships with wheels installed to roll into place
Resources & Downloads
See all from Serv-Ware
Specifications
| Chills | Glasses and Plates |
| Temperature Range | -4°F to 5°F |
| Cooling | Forced-Air |
| Storage Capacity | 2.67 cu. ft. |
| Shelves | 2 Plus Bottom Rack |
| Top | Lockable Sliding |
| Interior Lamp | LED |
| Refrigerant | R290 |
| Refrigerant Charge | 3.53 oz |
| BTU/H | 866 |
| Compressor | 1/5 HP |
| Defrost | Automatic, Every 6 Hours |
| Condensate | Built-In Evaporator, No Drain Required |
| Exterior | Steel, Painted Black |
| Interior | Stainless Steel |
| Insulation | Foamed-In-Place Polyurethane |
| Thermostat | Electronic, Digital LED Display |
| Voltage | 115 V |
| Amps | 2 A |
| Frequency | 60 Hz |
| Phase | 1 |
| Plug | NEMA 5-15P |
| Casters | Wheels Installed |
| Overall Dimensions | 24.1" W x 27" D x 34.8" H |
| Shipping Weight | 147 lbs |
Manufacturer's Warranty
-
3 Year
Labor
-
3 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
Chills mugs, glasses, and plates to -4°F for frosted bar service