The Serv-Ware GFR36 Glass Froster
The Serv-Ware GFR36 is a 37-inch glass and plate froster with 4.50 cubic feet of cabinet, chilling mugs, glasses, and plates to -4°F for a higher-volume bar. The wider body holds a deeper set of glassware ready to frost, and a bottom-mounted compressor keeps the whole load cold through a long, busy service.
Frosts Glasses And Plates
The cabinet runs between -4°F and 5°F, cold enough to frost beer mugs, cocktail glasses, and plates for chilled presentation across a busy bar. Forced-air cooling spreads the cold through the larger load so glassware frosts evenly front to back. The lockable sliding top seals the cold in and secures the contents when the bar is unattended.
Capacity And Racks
With 4.50 cubic feet, the GFR36 stages a larger bar's worth of frosted glassware on two shelves and a bottom rack, enough to keep a high-volume well supplied. The LED interior lamp keeps the load visible so a bartender grabs the right glass fast. The full-width sliding top opens the whole cabinet for quick access.
R290 Refrigeration
A bottom-mounted compressor cools on R290, a CFC-free hydrocarbon refrigerant, with an 866 BTU/h system driving the deep chill. The built-in condensate evaporator takes care of meltwater, so no floor drain or added plumbing is required. An automatic six-hour defrost keeps the coil clear on its own.
Build And Setup
The froster pairs a black painted steel exterior with a stainless steel interior over foamed-in-place polyurethane insulation, built for a wet, busy bar and the deep cold it holds. An electronic thermostat and digital LED display keep the setting in view, and the unit arrives with wheels installed to roll into place and run from a standard 115-volt outlet.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Chills mugs, glasses, and plates to -4°F for a high-volume bar
-
Forced-air cooling frosts the larger load evenly front to back
-
4.50 cubic feet on two shelves and a bottom rack stages more glassware
-
Lockable sliding top seals in the cold and secures the contents
-
LED interior lamp keeps the load visible for a fast grab
-
R290 hydrocarbon refrigerant drives the deep-chill cooling
-
Built-in condensate evaporator needs no floor drain or plumbing
-
Automatic six-hour defrost clears the coil on its own
-
Black painted steel body with a stainless steel interior for a wet bar
-
Electronic thermostat and digital LED display keep the setting in view
-
Wheels installed so it rolls into place
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Chills mugs, glasses, and plates to -4°F for a high-volume bar
Forced-air cooling frosts the larger load evenly front to back
4.50 cubic feet on two shelves and a bottom rack stages more glassware
Lockable sliding top seals in the cold and secures the contents
LED interior lamp keeps the load visible for a fast grab
The Serv-Ware GFR36 Glass Froster
The Serv-Ware GFR36 is a 37-inch glass and plate froster with 4.50 cubic feet of cabinet, chilling mugs, glasses, and plates to -4°F for a higher-volume bar. The wider body holds a deeper set of glassware ready to frost, and a bottom-mounted compressor keeps the whole load cold through a long, busy service.
Frosts Glasses And Plates
The cabinet runs between -4°F and 5°F, cold enough to frost beer mugs, cocktail glasses, and plates for chilled presentation across a busy bar. Forced-air cooling spreads the cold through the larger load so glassware frosts evenly front to back. The lockable sliding top seals the cold in and secures the contents when the bar is unattended.
Capacity And Racks
With 4.50 cubic feet, the GFR36 stages a larger bar's worth of frosted glassware on two shelves and a bottom rack, enough to keep a high-volume well supplied. The LED interior lamp keeps the load visible so a bartender grabs the right glass fast. The full-width sliding top opens the whole cabinet for quick access.
R290 Refrigeration
A bottom-mounted compressor cools on R290, a CFC-free hydrocarbon refrigerant, with an 866 BTU/h system driving the deep chill. The built-in condensate evaporator takes care of meltwater, so no floor drain or added plumbing is required. An automatic six-hour defrost keeps the coil clear on its own.
Build And Setup
The froster pairs a black painted steel exterior with a stainless steel interior over foamed-in-place polyurethane insulation, built for a wet, busy bar and the deep cold it holds. An electronic thermostat and digital LED display keep the setting in view, and the unit arrives with wheels installed to roll into place and run from a standard 115-volt outlet.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Chills mugs, glasses, and plates to -4°F for a high-volume bar
-
Forced-air cooling frosts the larger load evenly front to back
-
4.50 cubic feet on two shelves and a bottom rack stages more glassware
-
Lockable sliding top seals in the cold and secures the contents
-
LED interior lamp keeps the load visible for a fast grab
-
R290 hydrocarbon refrigerant drives the deep-chill cooling
-
Built-in condensate evaporator needs no floor drain or plumbing
-
Automatic six-hour defrost clears the coil on its own
-
Black painted steel body with a stainless steel interior for a wet bar
-
Electronic thermostat and digital LED display keep the setting in view
-
Wheels installed so it rolls into place
Resources & Downloads
See all from Serv-Ware
Specifications
| Chills | Glasses and Plates |
| Temperature Range | -4°F to 5°F |
| Cooling | Forced-Air |
| Storage Capacity | 4.50 cu. ft. |
| Shelves | 2 Plus Bottom Rack |
| Top | Lockable Sliding |
| Interior Lamp | LED |
| Refrigerant | R290 |
| Refrigerant Charge | 3.53 oz |
| BTU/H | 866 |
| Compressor | 1/5 HP |
| Defrost | Automatic, Every 6 Hours |
| Condensate | Built-In Evaporator, No Drain Required |
| Exterior | Steel, Painted Black |
| Interior | Stainless Steel |
| Insulation | Foamed-In-Place Polyurethane |
| Thermostat | Electronic, Digital LED Display |
| Voltage | 115 V |
| Amps | 2 A |
| Frequency | 60 Hz |
| Phase | 1 |
| Plug | NEMA 5-15P |
| Casters | Wheels Installed |
| Overall Dimensions | 36.9" W x 27" D x 34.8" H |
| Shipping Weight | 220 lbs |
Manufacturer's Warranty
-
3 Year
Labor
-
3 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
Chills mugs, glasses, and plates to -4°F for a high-volume bar