The Serv-Ware OS-6E-CWP Overshelf
The Serv-Ware OS-6E-CWP is a 72-inch double-tier overshelf that mounts above a work table and lifts two full levels of storage up off your prep surface. It is built from 18-gauge stainless steel and measures 72 inches wide, 12 inches deep, and 32 inches tall, with 70.63 inches of usable shelf length on each tier. When the line is fighting for room during a rush, this is where the squeeze bottles, pan inserts, and dry goods go so the tabletop stays clear for actual prep.
Two Tiers Of Overhead Storage
Both shelves sit above the work surface, so you reclaim the entire tabletop while keeping supplies within arm's reach. Use the lower tier for the things you grab constantly, like backup pans and condiments, and the upper tier for items you reach for less often. Each shelf gives you 70.63 inches of width and 10.63 inches of usable depth, enough to line up full-size hotel pans or a long row of squeeze bottles without crowding.
Socket-Mount Installation
The OS-6E-CWP attaches to the rear of a work table through welded socket brackets instead of standing on its own floor legs. The posts drop into the sockets and lock the shelf in place over the table, which keeps the floor underneath clear for sweeping, mopping, and foot traffic. Because it comes knock-down, the shelves and posts pack flat and bolt together on site, so you are not walking a fully assembled 72-inch unit through a kitchen doorway.
Heavy-Gauge Stainless Steel Build
The whole assembly is 18-gauge stainless steel, a heavier gauge than the light shelving that bows once you load it up. Stainless shrugs off the moisture, grease, and daily sanitizer that would pit or rust a painted shelf, and the smooth surfaces wipe down in a single pass at close. Unlike chrome wire shelving that traps crumbs and grease between the rods, a solid stainless shelf gives you a flat surface that holds small containers steady and cleans in seconds.
Sizing And Clearance
At 72 inches wide the OS-6E-CWP is sized to span a full-length work table, and the shallow 12-inch depth keeps it from crowding the working zone in front of it. Account for the 32-inch post height when you plan overhead clearance so staff can still load and unload the top tier without ducking. Mounted correctly, the shelf carries everyday prep supplies while leaving the work surface open for cutting, plating, and assembly.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Double-tier design puts two levels of storage above the work surface so the tabletop stays clear for prep
-
Socket-mount posts lock onto the rear of a work table instead of taking up floor space below
-
Knock-down construction packs flat and bolts together on site for easy handling through doorways
-
Heavy 18-gauge stainless steel resists grease, moisture, and daily sanitizer without pitting or rusting
-
Solid shelf surfaces wipe clean in one pass and hold small containers without gaps that trap debris
-
Lower tier keeps frequently used items at arm's reach while the upper tier stores less-used supplies
-
Smooth, non-porous stainless surfaces support back-of-house sanitation routines
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Double-tier design puts two levels of storage above the work surface so the tabletop stays clear for prep
Socket-mount posts lock onto the rear of a work table instead of taking up floor space below
Knock-down construction packs flat and bolts together on site for easy handling through doorways
Heavy 18-gauge stainless steel resists grease, moisture, and daily sanitizer without pitting or rusting
Solid shelf surfaces wipe clean in one pass and hold small containers without gaps that trap debris
The Serv-Ware OS-6E-CWP Overshelf
The Serv-Ware OS-6E-CWP is a 72-inch double-tier overshelf that mounts above a work table and lifts two full levels of storage up off your prep surface. It is built from 18-gauge stainless steel and measures 72 inches wide, 12 inches deep, and 32 inches tall, with 70.63 inches of usable shelf length on each tier. When the line is fighting for room during a rush, this is where the squeeze bottles, pan inserts, and dry goods go so the tabletop stays clear for actual prep.
Two Tiers Of Overhead Storage
Both shelves sit above the work surface, so you reclaim the entire tabletop while keeping supplies within arm's reach. Use the lower tier for the things you grab constantly, like backup pans and condiments, and the upper tier for items you reach for less often. Each shelf gives you 70.63 inches of width and 10.63 inches of usable depth, enough to line up full-size hotel pans or a long row of squeeze bottles without crowding.
Socket-Mount Installation
The OS-6E-CWP attaches to the rear of a work table through welded socket brackets instead of standing on its own floor legs. The posts drop into the sockets and lock the shelf in place over the table, which keeps the floor underneath clear for sweeping, mopping, and foot traffic. Because it comes knock-down, the shelves and posts pack flat and bolt together on site, so you are not walking a fully assembled 72-inch unit through a kitchen doorway.
Heavy-Gauge Stainless Steel Build
The whole assembly is 18-gauge stainless steel, a heavier gauge than the light shelving that bows once you load it up. Stainless shrugs off the moisture, grease, and daily sanitizer that would pit or rust a painted shelf, and the smooth surfaces wipe down in a single pass at close. Unlike chrome wire shelving that traps crumbs and grease between the rods, a solid stainless shelf gives you a flat surface that holds small containers steady and cleans in seconds.
Sizing And Clearance
At 72 inches wide the OS-6E-CWP is sized to span a full-length work table, and the shallow 12-inch depth keeps it from crowding the working zone in front of it. Account for the 32-inch post height when you plan overhead clearance so staff can still load and unload the top tier without ducking. Mounted correctly, the shelf carries everyday prep supplies while leaving the work surface open for cutting, plating, and assembly.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Double-tier design puts two levels of storage above the work surface so the tabletop stays clear for prep
-
Socket-mount posts lock onto the rear of a work table instead of taking up floor space below
-
Knock-down construction packs flat and bolts together on site for easy handling through doorways
-
Heavy 18-gauge stainless steel resists grease, moisture, and daily sanitizer without pitting or rusting
-
Solid shelf surfaces wipe clean in one pass and hold small containers without gaps that trap debris
-
Lower tier keeps frequently used items at arm's reach while the upper tier stores less-used supplies
-
Smooth, non-porous stainless surfaces support back-of-house sanitation routines
Resources & Downloads
See all from Serv-Ware
Specifications
| Tiers | 2 |
| Overall Width | 72" |
| Overall Depth | 12" |
| Overall Height | 32" |
| Usable Shelf Width | 70.63" |
| Usable Shelf Depth | 10.63" |
| Material | 18 Gauge Stainless Steel |
| Mounting | Socket-Mount |
| Assembly | Knock-Down |
| Shipping Weight | 36 lbs |
Manufacturer's Warranty
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
Double-tier design puts two levels of storage above the work surface so the tabletop stays clear for prep