The Serv-Ware SG3-2 Sneeze Guard
The Serv-Ware SG3-2 is a 44-inch double-sided sneeze guard for a small self-serve island where guests reach in from both sides. Two 6 mm tempered glass panels meet in a peak over a stainless steel top, forming a tent that shields the pans from either direction. It measures 44 inches wide, 22.5 inches deep, and 20 inches tall, which suits a compact breakfast bar or an office pantry hot station that diners approach from front and back.
Double-Sided Glass Barrier
Both faces of the guard are glassed in, so a guest standing on either side of the island is covered. The twin panels angle up to a ridge and leave an open gap underneath, letting people serve themselves from each side without lifting anything out of the way. This is the layout for a free-standing station in the middle of the floor rather than one pushed against a wall.
Six-Millimeter Tempered Glass
Each face is 6 mm tempered glass, the same heavy gauge on both sides so neither panel flexes when a tray bumps it. Tempered glass wipes clear and resists the edge chips that plague thinner panes on a self-serve bar handled all day. It also stays optically clear over time instead of clouding like acrylic, so the food still looks fresh at the end of a long service.
Stainless Steel Top And Legs
A stainless steel top and posts carry the two glass panels and take spills from both directions. Stainless cleans with the same sanitizer as the rest of your service area and will not corrode where condensation gathers under a cold pan. The unit knocks down for shipping, so the frame and glass come flat and bolt together on site.
Steam Table Fit
The SG3-2 drops onto the Serv-Ware EST3-1 steam table, matching its 44-inch width so the guard frames the wells evenly on both sides. Allow for the 20-inch height when you plan guest sightlines across the island. Set in place, it turns a steam table into a two-sided self-serve station that stays protected from every approach.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Double-sided peaked design shields pans from guests on both sides of a free-standing island
-
Twin 6 mm tempered glass panels resist chips and stay clear under constant self-serve handling
-
Open gap under each panel lets diners serve themselves from front and back without obstruction
-
Stainless steel top and posts clean with line sanitizer and resist corrosion under cold pans
-
Sized to fit the Serv-Ware EST3-1 steam table for an even mount over the wells
-
Knock-down construction arrives flat and bolts together on site
-
Compact 44-inch width fits a small breakfast bar or pantry hot station
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Double-sided peaked design shields pans from guests on both sides of a free-standing island
Twin 6 mm tempered glass panels resist chips and stay clear under constant self-serve handling
Open gap under each panel lets diners serve themselves from front and back without obstruction
Stainless steel top and posts clean with line sanitizer and resist corrosion under cold pans
Sized to fit the Serv-Ware EST3-1 steam table for an even mount over the wells
The Serv-Ware SG3-2 Sneeze Guard
The Serv-Ware SG3-2 is a 44-inch double-sided sneeze guard for a small self-serve island where guests reach in from both sides. Two 6 mm tempered glass panels meet in a peak over a stainless steel top, forming a tent that shields the pans from either direction. It measures 44 inches wide, 22.5 inches deep, and 20 inches tall, which suits a compact breakfast bar or an office pantry hot station that diners approach from front and back.
Double-Sided Glass Barrier
Both faces of the guard are glassed in, so a guest standing on either side of the island is covered. The twin panels angle up to a ridge and leave an open gap underneath, letting people serve themselves from each side without lifting anything out of the way. This is the layout for a free-standing station in the middle of the floor rather than one pushed against a wall.
Six-Millimeter Tempered Glass
Each face is 6 mm tempered glass, the same heavy gauge on both sides so neither panel flexes when a tray bumps it. Tempered glass wipes clear and resists the edge chips that plague thinner panes on a self-serve bar handled all day. It also stays optically clear over time instead of clouding like acrylic, so the food still looks fresh at the end of a long service.
Stainless Steel Top And Legs
A stainless steel top and posts carry the two glass panels and take spills from both directions. Stainless cleans with the same sanitizer as the rest of your service area and will not corrode where condensation gathers under a cold pan. The unit knocks down for shipping, so the frame and glass come flat and bolt together on site.
Steam Table Fit
The SG3-2 drops onto the Serv-Ware EST3-1 steam table, matching its 44-inch width so the guard frames the wells evenly on both sides. Allow for the 20-inch height when you plan guest sightlines across the island. Set in place, it turns a steam table into a two-sided self-serve station that stays protected from every approach.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Double-sided peaked design shields pans from guests on both sides of a free-standing island
-
Twin 6 mm tempered glass panels resist chips and stay clear under constant self-serve handling
-
Open gap under each panel lets diners serve themselves from front and back without obstruction
-
Stainless steel top and posts clean with line sanitizer and resist corrosion under cold pans
-
Sized to fit the Serv-Ware EST3-1 steam table for an even mount over the wells
-
Knock-down construction arrives flat and bolts together on site
-
Compact 44-inch width fits a small breakfast bar or pantry hot station
Resources & Downloads
See all from Serv-Ware
Specifications
| Guard Type | Double-Sided |
| Glass | 6 mm Tempered |
| Overall Width | 44" |
| Overall Depth | 22.5" |
| Overall Height | 20" |
| Material | Stainless Steel |
| Compatible Steam Table | EST3-1 |
| Shipping Weight | 32 lbs |
Manufacturer's Warranty
-
1 Year
Parts
Double-sided peaked design shields pans from guests on both sides of a free-standing island