The Serv-Ware SWM22-350F Cube Ice Machine
The Serv-Ware SWM22-350F is a 22-inch wide modular ice machine head that turns out up to 350 pounds of full cube ice in a 24-hour day. At just 22 inches across it tucks into the kind of narrow back-bar gap where a wider machine would never fit, which makes it a natural for cocktail bars, cafes, and compact restaurant lines. Because it is a head only, you set it on a separate storage bin sized to your service, and the air-cooled circuit means there is no water line to plumb. As a modular ice machine head, it pairs with a Serv-Ware ice storage bin, which is sold separately.
Dense Cubes That Hold Their Pour
Full cubes are heavy and slow to melt, so a rocks pour stays cold without thinning out while the guest nurses it. The SWM22-350F harvests on an automatic cycle and keeps going until the bin sensor reads full, then it stops on its own. A bartender can fire it in the morning and forget about it through service.
R290 Cooling on a Standard Outlet
This head uses R290, a natural hydrocarbon refrigerant that cools efficiently and avoids the regulatory squeeze landing on older synthetic blends. It draws and vents air out the front and runs on an ordinary 115-volt circuit, so you can push it flush to a wall and plug it into the outlet that is already there.
Stainless Cabinet Built for a Bar
A stainless steel exterior and interior over a reinforced heavy-duty cabinet stand up to spills, splashes, and the daily wipe-down behind a busy bar. Stainless keeps its finish where a painted panel would chip. The internal layout leaves the condenser easy to reach, so a quick clean does not turn into a project.
Lighting and Leveling
Integrated electronic controls show status at a glance and smart LED lighting with an included remote lets you eyeball the ice level without opening a door. Adjustable front leveling legs let you set the head true on a sloped bar floor and line it up over a drain.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Compact 22-inch wide modular head makes up to 350 pounds of dense full cubes a day, sized for tight back bars and cafe lines
-
Full cubes melt slowly so a rocks pour stays cold without thinning out between refills
-
Ships as the ice head only and seats on a separate storage bin you size to your service
-
Air-cooled refrigeration vents through the front for a flush install with no water line to plumb
-
Runs on a standard 115-volt circuit and R290 natural refrigerant
-
Stainless steel exterior and interior over a reinforced heavy-duty cabinet that wipes clean behind a busy bar
-
Integrated electronic controls with status indicators run the harvest cycle automatically
-
Smart LED lighting with an included remote shows the ice level without opening a door
-
Bin-full sensor stops ice production the moment the bin tops off
-
Adjustable front leveling legs square the head up on a sloped bar floor
-
Service-friendly layout keeps the condenser within easy reach for cleaning
-
Modular head that pairs with a Serv-Ware ice storage bin, sold separately
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Compact 22-inch wide modular head makes up to 350 pounds of dense full cubes a day, sized for tight back bars and cafe lines
Full cubes melt slowly so a rocks pour stays cold without thinning out between refills
Ships as the ice head only and seats on a separate storage bin you size to your service
Air-cooled refrigeration vents through the front for a flush install with no water line to plumb
Runs on a standard 115-volt circuit and R290 natural refrigerant
The Serv-Ware SWM22-350F Cube Ice Machine
The Serv-Ware SWM22-350F is a 22-inch wide modular ice machine head that turns out up to 350 pounds of full cube ice in a 24-hour day. At just 22 inches across it tucks into the kind of narrow back-bar gap where a wider machine would never fit, which makes it a natural for cocktail bars, cafes, and compact restaurant lines. Because it is a head only, you set it on a separate storage bin sized to your service, and the air-cooled circuit means there is no water line to plumb. As a modular ice machine head, it pairs with a Serv-Ware ice storage bin, which is sold separately.
Dense Cubes That Hold Their Pour
Full cubes are heavy and slow to melt, so a rocks pour stays cold without thinning out while the guest nurses it. The SWM22-350F harvests on an automatic cycle and keeps going until the bin sensor reads full, then it stops on its own. A bartender can fire it in the morning and forget about it through service.
R290 Cooling on a Standard Outlet
This head uses R290, a natural hydrocarbon refrigerant that cools efficiently and avoids the regulatory squeeze landing on older synthetic blends. It draws and vents air out the front and runs on an ordinary 115-volt circuit, so you can push it flush to a wall and plug it into the outlet that is already there.
Stainless Cabinet Built for a Bar
A stainless steel exterior and interior over a reinforced heavy-duty cabinet stand up to spills, splashes, and the daily wipe-down behind a busy bar. Stainless keeps its finish where a painted panel would chip. The internal layout leaves the condenser easy to reach, so a quick clean does not turn into a project.
Lighting and Leveling
Integrated electronic controls show status at a glance and smart LED lighting with an included remote lets you eyeball the ice level without opening a door. Adjustable front leveling legs let you set the head true on a sloped bar floor and line it up over a drain.
About Serv-Ware
Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.
Features & Benefits
-
Compact 22-inch wide modular head makes up to 350 pounds of dense full cubes a day, sized for tight back bars and cafe lines
-
Full cubes melt slowly so a rocks pour stays cold without thinning out between refills
-
Ships as the ice head only and seats on a separate storage bin you size to your service
-
Air-cooled refrigeration vents through the front for a flush install with no water line to plumb
-
Runs on a standard 115-volt circuit and R290 natural refrigerant
-
Stainless steel exterior and interior over a reinforced heavy-duty cabinet that wipes clean behind a busy bar
-
Integrated electronic controls with status indicators run the harvest cycle automatically
-
Smart LED lighting with an included remote shows the ice level without opening a door
-
Bin-full sensor stops ice production the moment the bin tops off
-
Adjustable front leveling legs square the head up on a sloped bar floor
-
Service-friendly layout keeps the condenser within easy reach for cleaning
-
Modular head that pairs with a Serv-Ware ice storage bin, sold separately
Resources & Downloads
See all from Serv-Ware
Specifications
| Ice Type | Full Cube |
| Ice Production (lb/24h) | 350 lb |
| Storage Bin | Sold separately |
| Cooling System | Air-cooled, front intake and exhaust |
| Refrigerant | R290 |
| BTU/H | 2,661 |
| Compressor | 1/4 HP |
| Operating Ambient Temperature Range | 40°F to 90°F |
| Defrost | Automatic |
| Voltage | 115 V |
| Power | 780 W |
| Frequency | 60 Hz |
| Phase | 1 |
| Exterior Material | Stainless Steel |
| Interior Material | Stainless Steel |
| Cabinet | Reinforced heavy-duty |
| Overall Dimensions (W x D x H) | 22.05" W x 23.39" D x 22.27" H |
| Shipping Weight | 119 lbs |
Manufacturer's Warranty
-
3 Year
Labor
-
3 Year
Parts
-
5 Year
Evaporator
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
Compact 22-inch wide modular head makes up to 350 pounds of dense full cubes a day, sized for tight back bars and cafe lines