Skip to content

Serv-Ware TSF-3060-R 60 In. Sink Table, 1-Compartment, Right-Side Drainboard, 16x20x12 In. Bowl

SKUTSF-3060-R BrandServ-Ware

The Serv-Ware TSF-3060-R Sink Table

Sized at 60 inches, the Serv-Ware TSF-3060-R lands in the middle of the sink-table line: enough surface to work a steady prep rotation, without claiming the floor a 72-inch unit demands. The single 16 by 20 by 12 inch bowl handles produce washing and pot soaking, while the integral stainless deck beside it gives a cook room to stage what they have already rinsed. It arrives at 103 pounds of welded 304 and 430 stainless, so it stays planted when someone leans into a scrub instead of sliding across the floor.

This configuration places the drainboard to the right of the bowl, a fit for stations fed from the right or paired beside a left-hand unit. The two layouts mirror each other, so you can line them up and keep soiled and clean zones flowing in one consistent direction.

Drainboard on the Right

Here the fabricated landing area sits to the right of the bowl, the layout you want when product arrives from the right or a cook is staging clean pans on that side. Run it as the mirror to a left-hand unit and the two tables form a continuous clean-to-soiled path along the wall. A welded 5-inch backsplash closes off the rear, so splash heads back into the tub rather than streaking the wall behind the table.

One-Piece 16-Gauge 304 Stainless Top

Both the deck and the bowl are formed from one piece of 16-gauge 304 stainless. That heavier gauge resists the warping and pitting that show up on lighter 430 tops once they take daily knocks, and the seamless bowl-to-deck transition leaves nowhere for grease to collect. The bullnose-rounded edge softens the working lip so a cook is not pressing a wrist against a square corner through a full rotation, and it sheds water back into the tub.

Welded Stainless Legs and Bullet Feet

The base is built on an 18-gauge 430 stainless hat-channel understructure, with stainless legs seated in stainless sockets and finished by adjustable bullet feet. The levelers let you sit the table flat on a worn kitchen floor so standing water clears the bowl every time. Because every leg is solid stainless rather than coated tube, there is no finish to peel off and contaminate a wet work area.

Included Faucet and Drain Basket

The unit comes with its DFY12-CWP faucet already deck-mounted on 4-inch centers, fed through a 12-inch swing nozzle that sweeps the bowl and lifts clear of a deep pan. It is a low-lead casting safe for food-contact water. The included 3.5-inch drain basket catches debris at the bowl so the waste line stays open through a busy rotation.

Mid-Size 60-Inch Run

The 60-inch length splits the difference between a tight galley table and a full prep wall, giving roughly a foot more drainboard than the 48-inch model for staging multiple pans at once. Depth holds at 30 inches and the top sits 35.5 inches high, so it ties into adjacent worktables and dish tables without a step in the surface. The extra length is why this unit ships at 103 pounds rather than the lighter 48-inch model.

About Serv-Ware

Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.

Features & Benefits

  1. Mid-length single-bowl station with enough deck to run a steady prep rotation in 60 inches
  2. Open landing surface sits to the right of the bowl, opposite a left-hand soiled station
  3. Drain basket catches scraps at the bowl so the waste line stays open through service
  4. Deck-set swinging faucet sweeps the full width of the bowl and clears a deep pan when filling
  5. Levelers on the bullet feet square the table to an uneven floor so the tub drains to the last drop
  6. All-stainless legs thread into matching sockets, with no chromed tube to flake into a wet zone
  7. Welded 5-inch rear splash guard keeps thrown water inside the bowl rather than behind the unit
  8. Rounded bullnose lip wraps the top, sparing a forearm from a sharp edge over a long shift
  9. Single-sheet 16-gauge 304 stainless deck and tub mean there is no welded joint to harbor bacteria
  10. 60-inch run adds roughly a foot of drainboard over the 48-inch model, weighing 103 pounds

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,466.82
  • Mid-length single-bowl station with enough deck to run a steady prep rotation in 60 inches
  • Open landing surface sits to the right of the bowl, opposite a left-hand soiled station
  • Drain basket catches scraps at the bowl so the waste line stays open through service
  • Deck-set swinging faucet sweeps the full width of the bowl and clears a deep pan when filling
  • Levelers on the bullet feet square the table to an uneven floor so the tub drains to the last drop
  • See full feature list

    The Serv-Ware TSF-3060-R Sink Table

    Sized at 60 inches, the Serv-Ware TSF-3060-R lands in the middle of the sink-table line: enough surface to work a steady prep rotation, without claiming the floor a 72-inch unit demands. The single 16 by 20 by 12 inch bowl handles produce washing and pot soaking, while the integral stainless deck beside it gives a cook room to stage what they have already rinsed. It arrives at 103 pounds of welded 304 and 430 stainless, so it stays planted when someone leans into a scrub instead of sliding across the floor.

    This configuration places the drainboard to the right of the bowl, a fit for stations fed from the right or paired beside a left-hand unit. The two layouts mirror each other, so you can line them up and keep soiled and clean zones flowing in one consistent direction.

    Drainboard on the Right

    Here the fabricated landing area sits to the right of the bowl, the layout you want when product arrives from the right or a cook is staging clean pans on that side. Run it as the mirror to a left-hand unit and the two tables form a continuous clean-to-soiled path along the wall. A welded 5-inch backsplash closes off the rear, so splash heads back into the tub rather than streaking the wall behind the table.

    One-Piece 16-Gauge 304 Stainless Top

    Both the deck and the bowl are formed from one piece of 16-gauge 304 stainless. That heavier gauge resists the warping and pitting that show up on lighter 430 tops once they take daily knocks, and the seamless bowl-to-deck transition leaves nowhere for grease to collect. The bullnose-rounded edge softens the working lip so a cook is not pressing a wrist against a square corner through a full rotation, and it sheds water back into the tub.

    Welded Stainless Legs and Bullet Feet

    The base is built on an 18-gauge 430 stainless hat-channel understructure, with stainless legs seated in stainless sockets and finished by adjustable bullet feet. The levelers let you sit the table flat on a worn kitchen floor so standing water clears the bowl every time. Because every leg is solid stainless rather than coated tube, there is no finish to peel off and contaminate a wet work area.

    Included Faucet and Drain Basket

    The unit comes with its DFY12-CWP faucet already deck-mounted on 4-inch centers, fed through a 12-inch swing nozzle that sweeps the bowl and lifts clear of a deep pan. It is a low-lead casting safe for food-contact water. The included 3.5-inch drain basket catches debris at the bowl so the waste line stays open through a busy rotation.

    Mid-Size 60-Inch Run

    The 60-inch length splits the difference between a tight galley table and a full prep wall, giving roughly a foot more drainboard than the 48-inch model for staging multiple pans at once. Depth holds at 30 inches and the top sits 35.5 inches high, so it ties into adjacent worktables and dish tables without a step in the surface. The extra length is why this unit ships at 103 pounds rather than the lighter 48-inch model.

    About Serv-Ware

    Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.

    Features & Benefits

    1. Mid-length single-bowl station with enough deck to run a steady prep rotation in 60 inches
    2. Open landing surface sits to the right of the bowl, opposite a left-hand soiled station
    3. Drain basket catches scraps at the bowl so the waste line stays open through service
    4. Deck-set swinging faucet sweeps the full width of the bowl and clears a deep pan when filling
    5. Levelers on the bullet feet square the table to an uneven floor so the tub drains to the last drop
    6. All-stainless legs thread into matching sockets, with no chromed tube to flake into a wet zone
    7. Welded 5-inch rear splash guard keeps thrown water inside the bowl rather than behind the unit
    8. Rounded bullnose lip wraps the top, sparing a forearm from a sharp edge over a long shift
    9. Single-sheet 16-gauge 304 stainless deck and tub mean there is no welded joint to harbor bacteria
    10. 60-inch run adds roughly a foot of drainboard over the 48-inch model, weighing 103 pounds

    Resources & Downloads

    See all from Serv-Ware

    Specifications

    Configuration1 compartment with integral drainboard
    Drainboard SideRight
    Overall Dimensions (W x D x H)60 in x 30 in x 35.5 in
    Bowl Dimensions (W x D x H)16 in x 20 in x 12 in
    Number of Bowls1
    Backsplash Height5 in
    Top and Tub Material16 gauge 304 stainless steel
    Understructure18 gauge 430 stainless steel hat channel
    LegsStainless steel with stainless sockets
    FeetAdjustable stainless bullet feet
    EdgeRounded bullnose
    Faucet ModelDFY12-CWP, included
    Faucet TypeDeck-mounted, low lead
    Faucet Centers4 in
    Faucet Spout12 in swing nozzle
    Drain Basket3.5 in, included
    Shipping Weight103 lbs

    Manufacturer's Warranty

    • 1 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Serv-Ware TSF-3060-R Sink Table

    About Serv-Ware

    Serv-Ware manufactures commercial refrigeration, cooking equipment, prep stations, sinks, shelving, and other back-of-house essentials for foodservice operations. The brand is known for offering a broad equipment portfolio that supports independent restaurants, chains, bakeries, convenience stores, and institutional kitchens. Serv-Ware focuses on practical designs that address everyday operational needs, with product lines that include reach-in refrigeration, prep tables, griddles, fryers, ranges, and ice machines. Its equipment is designed for common kitchen workflows where space, temperature control, and daily production demands matter. Serv-Ware’s reputation is built around dependable performance, straightforward operation, and a value-oriented price point.

    Product Features

    1. Mid-length single-bowl station with enough deck to run a steady prep rotation in 60 inches
    2. Open landing surface sits to the right of the bowl, opposite a left-hand soiled station
    3. Drain basket catches scraps at the bowl so the waste line stays open through service
    4. Deck-set swinging faucet sweeps the full width of the bowl and clears a deep pan when filling
    5. Levelers on the bullet feet square the table to an uneven floor so the tub drains to the last drop
    6. All-stainless legs thread into matching sockets, with no chromed tube to flake into a wet zone
    7. Welded 5-inch rear splash guard keeps thrown water inside the bowl rather than behind the unit
    8. Rounded bullnose lip wraps the top, sparing a forearm from a sharp edge over a long shift
    9. Single-sheet 16-gauge 304 stainless deck and tub mean there is no welded joint to harbor bacteria
    10. 60-inch run adds roughly a foot of drainboard over the 48-inch model, weighing 103 pounds

    See all from Serv-Ware

    Specifications

    Configuration1 compartment with integral drainboard
    Drainboard SideRight
    Overall Dimensions (W x D x H)60 in x 30 in x 35.5 in
    Bowl Dimensions (W x D x H)16 in x 20 in x 12 in
    Number of Bowls1
    Backsplash Height5 in
    Top and Tub Material16 gauge 304 stainless steel
    Understructure18 gauge 430 stainless steel hat channel
    LegsStainless steel with stainless sockets
    FeetAdjustable stainless bullet feet
    EdgeRounded bullnose
    Faucet ModelDFY12-CWP, included
    Faucet TypeDeck-mounted, low lead
    Faucet Centers4 in
    Faucet Spout12 in swing nozzle
    Drain Basket3.5 in, included
    Shipping Weight103 lbs

    Manufacturer's Warranty

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch