The Somerset SCS-150 VARIABLE SPEED Cheese Grater
The Somerset SCS-150 Variable Speed is a floor-standing cheese shredder for pizzerias, Mexican restaurants, commissaries, and institutions that shred cheese by the case instead of by the pound. It takes a whole 8 lb. block, pushes it through the blade with a hand lever, and shreds 25 lb. or more a minute straight into a cheese box on the shelf below. Three torque settings let the same machine handle soft mozzarella and Monterey Jack as well as hard cheddar and parmesan. It comes on a stainless stand with casters and a cheese box shelf, so it rolls to the walk-in and back. It runs on 220 V, 50/60 Hz single-phase power, so plan a dedicated 220 V receptacle at the spot where you will use it.
3-Speed Variable Torque For Soft To Hard Cheeses
Low, medium, and high torque settings let you match the drive to the cheese. Soft cheeses shred cleanly at low speed without smearing into the blade, and hard cheeses get the torque they need at high speed. One unit covers the whole cheese list, so you are not keeping a second shredder for parmesan.
Whole 8 Lb. Blocks, 25+ Lb. A Minute
The feed chute accepts a full 8 lb. block, so there is no pre-cutting. Lower the lever and the block is shredded in seconds; a full case of mozzarella is done in a few minutes rather than the better part of an hour on a box grater or a food processor. No adjustments are needed between blocks.
3/16 In. Blade Standard, Optional Cuts
The SCS-150 comes standard with a 3/16 in. blade, the everyday cut for pizza topping and taco cheese. Optional blades are available in 3/32, 5/32, 1/4, 5/16, and 1/2 in. sizes plus a KD-GD blade, so you can set up a fine shred for salads or a thick shred for melting.
Mobile Stand With Cheese Box Shelf
The shredder rides on a stainless stand with casters that turn a full 360 degrees, and a cheese box shelf sits directly under the discharge chute. Shredded cheese lands in the box, not on the floor, and the whole station rolls out of the way when you are done. Overall height with the lever raised is 66-1/2 in.
2 HP Maintenance-Free Drive And Safety Sensors
A heavy duty 2 HP gear motor runs the blade and is maintenance free, with sealed, permanently lubricated ball bearings. Safety sensors shut the machine off automatically. The housing is all stainless steel, simple to operate and easy to wipe down at close.
Features & Benefits
-
Floor-standing cheese shredder for pizzerias, Mexican restaurants, commissaries, institutions, and ethnic food production
-
Shreds a whole case of cheese in minutes
-
Accepts full blocks of cheese without pre-cutting
-
3-speed variable torque (low, medium, high) for soft to hard cheeses with one unit
-
Comes standard with a 3/16 in. blade
-
Optional blades from fine to thick shreds
-
No adjustments needed between blocks
-
Stainless stand with casters and 360 degree mobility
-
Cheese box shelf directly under the discharge chute
-
Hand lever pushes the block through the blade
-
Safety sensors for automatic shutoff
-
Heavy duty 2 HP maintenance free gear motor
-
Sealed ball bearings, permanently lubricated
-
All stainless steel construction
-
Safe, simple, easy to operate and clean
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Somerset SCS-150 VARIABLE SPEED Cheese Grater
The Somerset SCS-150 Variable Speed is a floor-standing cheese shredder for pizzerias, Mexican restaurants, commissaries, and institutions that shred cheese by the case instead of by the pound. It takes a whole 8 lb. block, pushes it through the blade with a hand lever, and shreds 25 lb. or more a minute straight into a cheese box on the shelf below. Three torque settings let the same machine handle soft mozzarella and Monterey Jack as well as hard cheddar and parmesan. It comes on a stainless stand with casters and a cheese box shelf, so it rolls to the walk-in and back. It runs on 220 V, 50/60 Hz single-phase power, so plan a dedicated 220 V receptacle at the spot where you will use it.
3-Speed Variable Torque For Soft To Hard Cheeses
Low, medium, and high torque settings let you match the drive to the cheese. Soft cheeses shred cleanly at low speed without smearing into the blade, and hard cheeses get the torque they need at high speed. One unit covers the whole cheese list, so you are not keeping a second shredder for parmesan.
Whole 8 Lb. Blocks, 25+ Lb. A Minute
The feed chute accepts a full 8 lb. block, so there is no pre-cutting. Lower the lever and the block is shredded in seconds; a full case of mozzarella is done in a few minutes rather than the better part of an hour on a box grater or a food processor. No adjustments are needed between blocks.
3/16 In. Blade Standard, Optional Cuts
The SCS-150 comes standard with a 3/16 in. blade, the everyday cut for pizza topping and taco cheese. Optional blades are available in 3/32, 5/32, 1/4, 5/16, and 1/2 in. sizes plus a KD-GD blade, so you can set up a fine shred for salads or a thick shred for melting.
Mobile Stand With Cheese Box Shelf
The shredder rides on a stainless stand with casters that turn a full 360 degrees, and a cheese box shelf sits directly under the discharge chute. Shredded cheese lands in the box, not on the floor, and the whole station rolls out of the way when you are done. Overall height with the lever raised is 66-1/2 in.
2 HP Maintenance-Free Drive And Safety Sensors
A heavy duty 2 HP gear motor runs the blade and is maintenance free, with sealed, permanently lubricated ball bearings. Safety sensors shut the machine off automatically. The housing is all stainless steel, simple to operate and easy to wipe down at close.
Features & Benefits
-
Floor-standing cheese shredder for pizzerias, Mexican restaurants, commissaries, institutions, and ethnic food production
-
Shreds a whole case of cheese in minutes
-
Accepts full blocks of cheese without pre-cutting
-
3-speed variable torque (low, medium, high) for soft to hard cheeses with one unit
-
Comes standard with a 3/16 in. blade
-
Optional blades from fine to thick shreds
-
No adjustments needed between blocks
-
Stainless stand with casters and 360 degree mobility
-
Cheese box shelf directly under the discharge chute
-
Hand lever pushes the block through the blade
-
Safety sensors for automatic shutoff
-
Heavy duty 2 HP maintenance free gear motor
-
Sealed ball bearings, permanently lubricated
-
All stainless steel construction
-
Safe, simple, easy to operate and clean
Resources & Downloads
See all from Somerset
Specifications
| Shredding Capacity | 25+ lb per minute |
| Maximum Block Size | 8 lb |
| Speeds | 3 (low, medium, high torque) |
| Standard Blade | 3/16 in. |
| Optional Blades | 3/32, 5/32, 1/4, 5/16, 1/2 in., KD-GD |
| Feed | Hand lever |
| Motor | 2 HP heavy duty gear motor, maintenance free |
| Phase | Single phase |
| Voltage | 220 V, 50/60 Hz |
| Bearings | Sealed ball bearings, permanently lubricated |
| Safety | Safety sensors with automatic shutoff |
| Stand | Stainless steel with casters, included |
| Shelf | Cheese box shelf, included |
| Finish | All stainless steel |
| Discharge Height | 25 in. |
| Overall Width | 18 in. |
| Overall Depth | 33-1/8 in. |
| Overall Height | 66-1/2 in. |
| Shipping Weight | 225 lb |
| Country of Origin | USA |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
-
CE Listed
-
ETL US & Canada

