The Turbo Air TSP-2250-V Reach-In Pan Rack
The Turbo Air TSP-2250-V is a 21 in. wide by 24 in. deep by 50 in. tall pan rack built to slide into the full door section of a Turbo Air reach-in refrigerator or freezer. It holds 15 full-size 18 x 26 in. sheet pans on 3 in. ledge spacing, so a full cabinet section goes from wire shelves that hold a handful of pans to a proper pan tower for proofing dough, holding portioned proteins, or staging tray after tray of prepped product for the line.
304 Stainless Steel for High-Moisture Refrigerated Storage
Inside a walk-in or reach-in, condensation and daily wipe-downs eat through plated or painted racks in a few seasons. This rack is 304 stainless steel, the grade that shrugs off that constant moisture without rusting or flaking, so it keeps the same clean finish year after year and never sheds anything onto the food below it. Because you can hose or wipe it down with the same cleaners you use on the cabinet interior, it fits into your normal sanitation routine without special handling.
15-Pan Capacity on 3 In. Ledge Spacing
The 3 in. spacing between ledges gives you enough clearance to slide in a full 18 x 26 in. sheet pan of rolls or portioned chicken without crushing what is on the tray below, while still fitting 15 pans in the 50 in. height. Your cooks can load or pull a single pan without disturbing the rest, which is a real difference from stacking pans on a shelf and lifting the whole pile to reach the bottom one.
The rack comes knocked down as two tray assemblies, four horizontal posts, and 16 M6 x 16 hex screws. It assembles in minutes with a hex wrench and weighs 41 lb once built, light enough for one person to carry into the cabinet.
About Turbo Air
Turbo Air is a global refrigeration manufacturer known for engineering energy-efficient, easy-to-service equipment for commercial foodservice. Headquartered in Texas with manufacturing and distribution facilities across the U.S., Turbo Air builds reach-ins, prep tables, merchandisers, and display cases designed for reliability in high-demand kitchens. The brand integrates self-cleaning condenser systems and digital temperature control for consistent performance and reduced maintenance. NSF- and ENERGY STAR-certified models reflect Turbo Air’s focus on efficiency and food safety standards. With broad parts availability and nationwide technical support, Turbo Air provides operators and dealers with dependable refrigeration solutions for restaurants, institutions, and retail environments.
Features & Benefits
-
Fits in the full door section of Turbo Air reach-in refrigerators and freezers
-
Turns a cabinet section into vertical pan storage for proofing, holding, and prep staging
-
Holds 15 full-size 18 x 26 in. sheet pans
-
3 in. (76 mm) ledge spacing between pan slides
-
304 stainless steel construction resists corrosion in high-moisture refrigerated environments
-
Overall size 21 in. W x 24 in. D x 50 in. H
-
Knocked down for assembly: 2 tray assemblies, 4 horizontal posts, 16 M6 x 16 hex screws
-
Assembled weight 41 lb
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Fits in the full door section of Turbo Air reach-in refrigerators and freezers
Turns a cabinet section into vertical pan storage for proofing, holding, and prep staging
Holds 15 full-size 18 x 26 in. sheet pans
3 in. (76 mm) ledge spacing between pan slides
304 stainless steel construction resists corrosion in high-moisture refrigerated environments
The Turbo Air TSP-2250-V Reach-In Pan Rack
The Turbo Air TSP-2250-V is a 21 in. wide by 24 in. deep by 50 in. tall pan rack built to slide into the full door section of a Turbo Air reach-in refrigerator or freezer. It holds 15 full-size 18 x 26 in. sheet pans on 3 in. ledge spacing, so a full cabinet section goes from wire shelves that hold a handful of pans to a proper pan tower for proofing dough, holding portioned proteins, or staging tray after tray of prepped product for the line.
304 Stainless Steel for High-Moisture Refrigerated Storage
Inside a walk-in or reach-in, condensation and daily wipe-downs eat through plated or painted racks in a few seasons. This rack is 304 stainless steel, the grade that shrugs off that constant moisture without rusting or flaking, so it keeps the same clean finish year after year and never sheds anything onto the food below it. Because you can hose or wipe it down with the same cleaners you use on the cabinet interior, it fits into your normal sanitation routine without special handling.
15-Pan Capacity on 3 In. Ledge Spacing
The 3 in. spacing between ledges gives you enough clearance to slide in a full 18 x 26 in. sheet pan of rolls or portioned chicken without crushing what is on the tray below, while still fitting 15 pans in the 50 in. height. Your cooks can load or pull a single pan without disturbing the rest, which is a real difference from stacking pans on a shelf and lifting the whole pile to reach the bottom one.
The rack comes knocked down as two tray assemblies, four horizontal posts, and 16 M6 x 16 hex screws. It assembles in minutes with a hex wrench and weighs 41 lb once built, light enough for one person to carry into the cabinet.
About Turbo Air
Turbo Air is a global refrigeration manufacturer known for engineering energy-efficient, easy-to-service equipment for commercial foodservice. Headquartered in Texas with manufacturing and distribution facilities across the U.S., Turbo Air builds reach-ins, prep tables, merchandisers, and display cases designed for reliability in high-demand kitchens. The brand integrates self-cleaning condenser systems and digital temperature control for consistent performance and reduced maintenance. NSF- and ENERGY STAR-certified models reflect Turbo Air’s focus on efficiency and food safety standards. With broad parts availability and nationwide technical support, Turbo Air provides operators and dealers with dependable refrigeration solutions for restaurants, institutions, and retail environments.
Features & Benefits
-
Fits in the full door section of Turbo Air reach-in refrigerators and freezers
-
Turns a cabinet section into vertical pan storage for proofing, holding, and prep staging
-
Holds 15 full-size 18 x 26 in. sheet pans
-
3 in. (76 mm) ledge spacing between pan slides
-
304 stainless steel construction resists corrosion in high-moisture refrigerated environments
-
Overall size 21 in. W x 24 in. D x 50 in. H
-
Knocked down for assembly: 2 tray assemblies, 4 horizontal posts, 16 M6 x 16 hex screws
-
Assembled weight 41 lb
Resources & Downloads
See all from Turbo Air
Specifications
| Rack Type | Reach-in pan rack, full door |
| Compatible Equipment | Full door reach-in refrigerators and freezers |
| Pan Size | 18 x 26 in. full-size sheet pan |
| Pan Capacity | 15 |
| Shelf / Ledge Spacing | 3 in. (76 mm) |
| Material | 304 stainless steel |
| Length (W) | 21 in. |
| Depth | 24 in. |
| Height | 50 in. |
| Weight | 41 lb |
| Assembly | Knocked down, hex screw assembly |
| Tray Assemblies | 2 |
| Horizontal Posts | 4 |
| Hardware | 16 M6 x 16 hex screws |
Fits in the full door section of Turbo Air reach-in refrigerators and freezers