BE&SCO 9AE-12 120V Automatic Tortilla Press, Up to 500/hr, 4" to 7" Diameter, Non-Stick Plates

BE&SCO manufactures tortilla production equipment for commercial foodservice and high-volume production environments. The company is known for automated tortilla machines, dough handling systems, fryers, and related equipment used by restaurants, commissaries, institutional kitchens, and tortilla producers. BE&SCO equipment is designed to support consistent product quality and efficient output across a range of production volumes. The brand has developed a strong reputation in tortilla production through practical engineering focused on reliability, ease of operation, and long-term performance. BE&SCO also offers customized system configurations to meet the needs of operators expanding tortilla production capacity.

A commercial tortilla press flattens balls of corn or flour dough into round tortilla discs ready for cooking. Taquerias, Mexican restaurants, tortillerias, pizzerias, flatbread restaurants, and prepared-food counters use them to produce fresh tortillas and dough rounds at production speeds hand-pressing cannot match. The same equipment is also called a commercial flour tortilla press, tortilla dough press, flatbread press, tortilla press machine, or commercial tortilla machine.

The right commercial tortilla press depends on three things: tortilla diameter, manual versus automatic operation, and whether the unit doubles as a pizza dough press. Manual heated presses cover diameters from 4 inches up to 16 inches per tortilla, or up to 18 inches for pizza dough rounds. The largest manual press handles up to six tortillas at once on a single platen cycle. Automatic wedge presses run motorized cycles with hands-free auto-eject and produce diameters from 4 to 13 inches at programmed thickness. Automatic corn tortilla machines press and cut continuous corn masa into finished tortillas at up to 840 tortillas per hour in 4 to 6.25 inch diameters. Common configurations, buying guidance, and frequent buyer questions follow below.

Common Types and Configurations

• Manual heated tortilla press: Hand-operated clamshell press with dual heated platens. Operator places dough balls on the lower platen and pulls the lever down. Catalog top-of-line model has a 16 inch by 20 inch platen and presses up to 6 tortillas in a single cycle. Adjustable thickness up to 1.5 inches.
• Compact manual wedge press: Smaller manual press with a wedge-style lever. Catalog units produce 4 to 7 inch diameters in a compact bench-top format for small to mid-volume operations.
• Automatic wedge press: Motorized wedge press with patented auto-eject and adjustable thickness handle. Hands-free, no molds required. Catalog units produce 4 to 13 inch diameters for tortillas, flatbreads, and pizza crusts at 220V or 240V single-phase.
• Automatic corn tortilla machine: Continuous-feed unit that presses and cuts corn masa into finished tortillas at up to 840 tortillas per hour. Tortilla sizes 4 to 6.25 inches in diameter, thickness 1 to 2 millimeters. 110V single-phase, NSF and ETL listed. Tabletop format for tortillerias and high-volume taquerias.
• Dual-use pizza and tortilla press: Heated dough press designed for both pizza dough rounds and tortillas. The same machine doubles between menu programs, useful for restaurants that serve both Italian and Mexican menus.
• Dual heated platens with PTFE coating: Top and bottom platens both heat the dough to up to 400°F. Non-stick PTFE coating on both platens. Cuts press time and partly cooks the tortilla, reducing griddle time after pressing.
• Digital timer and thickness control: Programmable press time and depth on select catalog units. Digital temperature display shows current heat level. Produces repeatable tortilla thickness across staff and shifts.

What to Look at Before You Buy

• Tortilla diameter: Match the press platen to the diameter you serve. Small street-taco operations use 4 to 6 inch tortillas. Standard taco service uses 6 to 8 inch. Burrito and quesadilla service uses 10 to 13 inch. Catalog presses cover 4 to 16 inches for single tortillas and up to 18 inches for pizza dough rounds.
• Manual vs automatic: Manual presses cost less and suit lower-volume operations where one operator presses tortillas one at a time. Automatic presses run motorized cycles for repeatable thickness and higher throughput. Continuous-feed tortilla machines suit high-volume tortillerias and taquerias producing hundreds of tortillas per hour.
• Corn vs flour tortillas: Manual heated presses handle both corn and flour dough. Automatic continuous-feed tortilla machines in this catalog are tuned for corn masa. Flour tortilla operations typically use a heated press plus a separate cook surface or comal.
• Single-purpose vs dual-use: Dual-use pizza and tortilla presses run both menu programs from one machine. Useful for restaurants that serve Italian and Mexican menus from the same kitchen or for venues that want flexibility without buying two presses.
• Heated platens and PTFE coating: Heated upper and lower platens flatten the dough at up to 400°F and partly cook it in one pass. PTFE non-stick coating reduces sticking and speeds cleanup between batches. Standard on the heated catalog presses.
• Voltage: Catalog units run on standard 110V or 220V to 240V single-phase depending on size. Confirm electrical service before ordering.
• Footprint: Compact manual presses fit on a counter. Larger heated dual-use presses fit in a bench-top space-saving format. Continuous-feed tortilla machines sit on a tabletop with hopper-loading clearance.
• Cleaning access: Removable platen covers, accessible drip trays, and easy disassembly matter for daily sanitation. Tortilla operations clean between dough changes; confirm components come apart without tools.

Frequently Asked Questions

What is a commercial tortilla press used for?

A commercial tortilla press flattens balls of corn or flour dough into round tortillas at production speeds. Taquerias use them for street-taco service. Mexican restaurants use them for taco, burrito, and quesadilla menu items. Tortillerias use the automatic continuous-feed units for retail tortilla production. Pizzerias use the dual-use models to press both pizza dough rounds and tortillas from one machine. Flatbread restaurants and prepared-food counters use them for naan, pita, and similar round flatbreads.

What is the difference between a manual tortilla press and an automatic tortilla machine?

A manual tortilla press uses a hand-operated lever to flatten dough between heated platens. The operator places dough balls on the lower platen and pulls the lever down. Manual presses suit low to mid volume and produce diameters from 4 to 16 inches. The largest catalog manual press handles up to six tortillas at once on a single platen cycle. An automatic tortilla machine runs motorized cycles. Automatic wedge presses run a programmed press cycle with hands-free auto-eject. Continuous-feed corn tortilla machines press and cut masa into finished tortillas at up to 840 tortillas per hour in 4 to 6.25 inch diameters. Automatic units cost more but produce consistent thickness across staff and shifts.

Can a tortilla press make pizza dough too?

Yes. Three of the six units in this catalog are dual-use heated dough presses designed for both pizza dough rounds and tortillas. Restaurants that serve both Italian and Mexican menus can run one dual-use press instead of buying two separate machines. The heated platens flatten pizza dough into rounds with the same press cycle used for flour tortillas. Confirm the unit's maximum diameter matches the pizza size you serve. Pizzeria operations typically need a 12 to 18 inch diameter; tortilla operations typically need a 6 to 13 inch diameter.

Related Categories

• Pizza Press
• Pizza Ovens
• Tamale Equipment
• Tortilla Grills

Shop by Brand

• BE&SCO
• DoughXpress
• Tortilla Masters