The LBC Bakery KM-120P Spiral Dough Mixer
The LBC Bakery KM-120P is a fixed-bowl spiral mixer purpose-built for low-moisture doughs: pizza and bagel formulas stiff enough to strain a general-purpose machine. That focus is the point. Stiff dough fights the hook on every rotation, so LBC built this mixer around torque, rigidity, and drive redundancy instead of versatility. It is not suited for bread or pastry doughs; run it on what it was made for and it will turn out triple-bag pizza batches year after year.
Hook Geometry That Works Stiff Dough
The cylindrical dough hook ends in a "J" profile that reaches the center of the bowl, holding an average clearance of 5/16 inch without ever touching stainless. That close pass is what develops a tight dough quickly: the hook keeps folding the mass against the breaker bar instead of spinning it in place. The breaker bar itself is wrought stainless steel rather than cast, fixed to the head with four stainless bolts, a distinction that matters the first time a full batch loads it up. Polyethylene guide rollers on sealed ball bearings steady the bowl rim from above, so the hook-to-bowl geometry stays true under load.
Independent, Reversible Drives
Bowl and hook run on separate reversible motors. Reversing direction during incorporation pulls dry flour down into the mass instead of letting it ride on top, which is where stiff batches usually waste their first minutes. The hook gives you two forward speeds through a dual-reduction drive, and the timer changes speed automatically mid-cycle, so a batch can start slow for incorporation and finish fast for development with nobody standing over it. Power moves through a dual-stage, non-slip belt system that keeps the torque high and the noise low.
Controls Built For a Production Floor
Everything the operator touches sits at eye level on the front panel: digital timer and speed indicator, emergency stop, and a manual back-up control that keeps the mixer running even if the digital side fails, which is the difference between a service call and a lost production day. The interlocked bowl cover and hook guard stop the machine the moment they open, while the fill opening at the front of the cover lets ingredients go in mid-mix without lifting the guard at all. Automatic over-current protection backs up the motors, so an overloaded batch trips a breaker instead of cooking a winding.
Frame, Feet, And Wheels
A welded heavy-gauge steel frame box with a torsion-tube design keeps the head section and bearing box rigid against the twisting loads a spiral mixer generates at full capacity. When cleaning day comes, the three-point caster system, one forward swivel caster and two rear fixed wheels, lets one person roll a machine this heavy away from the wall; four screw-down cushioned feet, mounted external to the base where they are easy to reach, plant it back in place for production. The mixer connects through a 6-foot supply cord with a NEMA cap, so repositioning it is a matter of unplugging, not rewiring.
About LBC Bakery
LBC Bakery Equipment designs and manufactures bakery equipment for supermarkets, independent bakeries, foodservice operations, and institutional kitchens across North America. Since beginning production in 2001, the company has focused on equipment engineered for the North American market with U.S. and Canadian safety and sanitation approvals. Its lineup includes rack ovens, proofers, retarders, mixers, pizza ovens, and rotisserie equipment, with an emphasis on energy-efficient oven technology and practical control system improvements. Its equipment is used in retail bakeries, supermarket bakeries, commissaries, and food production facilities where consistent performance and straightforward operation are priorities.
Features & Benefits
-
Mixes large pizza and bagel batches at a 120 kilogram working capacity per cycle
-
Handles roughly three 50-lb bags of flour per batch at a 60/40 flour-to-water ratio
-
Cylindrical "J" type dough hook with 5/16" clearance reaches the bowl center for rapid development
-
2-speed reversible dough hook motor with an independent reversible bowl drive motor
-
High-torque dual-stage, non-slip belt drive system for quiet, powerful mixing
-
Heavy-gauge stainless steel bowl with solid welded and polished stainless top ring
-
Heavy-duty dough breaker bar and solid bowl top roll for clean, consistent batches
-
60-minute timer with automatic speed change plus a manual back-up control system
-
Front-mounted controls with emergency stop and automatic over-current protection
-
Interlocking bowl cover and hook guard with front ingredient fill opening for safety
-
Three-point caster system for easy cleaning with screw-down cushioned feet for stability
-
Rigid welded steel frame with torsion-tube design and 6' cord with NEMA cord cap
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The LBC Bakery KM-120P Spiral Dough Mixer
The LBC Bakery KM-120P is a fixed-bowl spiral mixer purpose-built for low-moisture doughs: pizza and bagel formulas stiff enough to strain a general-purpose machine. That focus is the point. Stiff dough fights the hook on every rotation, so LBC built this mixer around torque, rigidity, and drive redundancy instead of versatility. It is not suited for bread or pastry doughs; run it on what it was made for and it will turn out triple-bag pizza batches year after year.
Hook Geometry That Works Stiff Dough
The cylindrical dough hook ends in a "J" profile that reaches the center of the bowl, holding an average clearance of 5/16 inch without ever touching stainless. That close pass is what develops a tight dough quickly: the hook keeps folding the mass against the breaker bar instead of spinning it in place. The breaker bar itself is wrought stainless steel rather than cast, fixed to the head with four stainless bolts, a distinction that matters the first time a full batch loads it up. Polyethylene guide rollers on sealed ball bearings steady the bowl rim from above, so the hook-to-bowl geometry stays true under load.
Independent, Reversible Drives
Bowl and hook run on separate reversible motors. Reversing direction during incorporation pulls dry flour down into the mass instead of letting it ride on top, which is where stiff batches usually waste their first minutes. The hook gives you two forward speeds through a dual-reduction drive, and the timer changes speed automatically mid-cycle, so a batch can start slow for incorporation and finish fast for development with nobody standing over it. Power moves through a dual-stage, non-slip belt system that keeps the torque high and the noise low.
Controls Built For a Production Floor
Everything the operator touches sits at eye level on the front panel: digital timer and speed indicator, emergency stop, and a manual back-up control that keeps the mixer running even if the digital side fails, which is the difference between a service call and a lost production day. The interlocked bowl cover and hook guard stop the machine the moment they open, while the fill opening at the front of the cover lets ingredients go in mid-mix without lifting the guard at all. Automatic over-current protection backs up the motors, so an overloaded batch trips a breaker instead of cooking a winding.
Frame, Feet, And Wheels
A welded heavy-gauge steel frame box with a torsion-tube design keeps the head section and bearing box rigid against the twisting loads a spiral mixer generates at full capacity. When cleaning day comes, the three-point caster system, one forward swivel caster and two rear fixed wheels, lets one person roll a machine this heavy away from the wall; four screw-down cushioned feet, mounted external to the base where they are easy to reach, plant it back in place for production. The mixer connects through a 6-foot supply cord with a NEMA cap, so repositioning it is a matter of unplugging, not rewiring.
About LBC Bakery
LBC Bakery Equipment designs and manufactures bakery equipment for supermarkets, independent bakeries, foodservice operations, and institutional kitchens across North America. Since beginning production in 2001, the company has focused on equipment engineered for the North American market with U.S. and Canadian safety and sanitation approvals. Its lineup includes rack ovens, proofers, retarders, mixers, pizza ovens, and rotisserie equipment, with an emphasis on energy-efficient oven technology and practical control system improvements. Its equipment is used in retail bakeries, supermarket bakeries, commissaries, and food production facilities where consistent performance and straightforward operation are priorities.
Features & Benefits
-
Mixes large pizza and bagel batches at a 120 kilogram working capacity per cycle
-
Handles roughly three 50-lb bags of flour per batch at a 60/40 flour-to-water ratio
-
Cylindrical "J" type dough hook with 5/16" clearance reaches the bowl center for rapid development
-
2-speed reversible dough hook motor with an independent reversible bowl drive motor
-
High-torque dual-stage, non-slip belt drive system for quiet, powerful mixing
-
Heavy-gauge stainless steel bowl with solid welded and polished stainless top ring
-
Heavy-duty dough breaker bar and solid bowl top roll for clean, consistent batches
-
60-minute timer with automatic speed change plus a manual back-up control system
-
Front-mounted controls with emergency stop and automatic over-current protection
-
Interlocking bowl cover and hook guard with front ingredient fill opening for safety
-
Three-point caster system for easy cleaning with screw-down cushioned feet for stability
-
Rigid welded steel frame with torsion-tube design and 6' cord with NEMA cord cap
Resources & Downloads
See all from LBC Bakery
Specifications
| Bowl Capacity | 120 kg |
| Flour Capacity | 165 lb |
| Dough Capacity | 264 lb |
| Bags Per Batch | 3 (50 lb) |
| Dough Hook | Cylindrical "J" type, 5/16" clearance |
| Hook Speeds | 2-speed reversible |
| Bowl Drive | Reversible |
| Mixing Motor | 6 to 12 HP |
| Total Power | 9.55 kW |
| Electrical | 208-220 VAC, 3 phase, 40 A |
| Timer | 60 minutes, auto speed change |
| Dimensions (H x W x D) | 55.1" x 32.6" x 53.1" |
| Actual Weight | 1300 lb |
| Shipping Weight | 1442 lb |
| Bowl Material | Stainless steel |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

