Skip to content

CMA Dishmachines 12620.00 42 In. Dishtable Sorting Shelf, Slanted Design, Wall Mounted, Stainless Steel

SKU12620.00 BrandCMA Dishmachines

The CMA Dishmachines 12620.00 Stainless Steel Wall Shelf

The CMA Dishmachines 12620.00 is a 42 in. wide slanted sorting shelf that mounts on the wall above your dish line and turns dead wall space into working rack storage. Freshly washed racks of glasses and cups slide onto the pitched surface, drain toward the front, and stay visible for sorting, all without claiming an inch of tabletop. It is a simple piece of stainless fabrication that solves a real bottleneck in busy dish rooms: where clean racks live while they finish drying.

Slanted Design That Drains and Sorts

The shelf face measures 42 in. wide by 21-1/2 in. deep and sits at a slant rather than lying flat. Pitch matters with glassware, because a rack of inverted glasses on a level shelf keeps rinse water trapped against every base, while on this slanted surface gravity pulls the water forward and off so racks air-dry noticeably faster. The angle also tips rack contents toward whoever is standing below, letting a bartender or server read the rack and pull the right glass without dragging the whole thing down. During a bar rush, that visibility is the difference between grabbing a wine glass in two seconds and unloading half a rack to find one.

Wall-Mounted to Free Up Table and Floor Space

Because it hangs on the wall instead of standing on legs, the 12620.00 adds storage without adding footprint. Mounting it above the clean end of your dishtable run puts rack storage exactly where racks exit the machine, so unloading becomes a single lift instead of a walk to a shelving unit across the room. There is nothing underneath to clean around either, which leaves the table and floor below completely open for work and for washdown. CMA shows this same 42 in. slant shelf paired with its clean-side dishtables, and the 21-1/2 in. depth gives full front-to-back support under standard dish racks.

All Stainless Steel Construction

CMA fabricates the shelf entirely from stainless steel, so constant contact with rinse water, detergent haze, and sanitizer mist will not corrode it. Stainless also wipes down in seconds at closing time, unlike painted or galvanized shelving that chips, streaks, and eventually rusts in a wet dish room. At 24 lb shipping weight the unit is light enough for a straightforward wall install, yet the all-metal build shoulders loaded glass racks shift after shift. Once it is anchored, you gain a permanent drying and sorting station that never needs more maintenance than a wipe.

Features & Benefits

  1. Hang it above the clean end of your dish line so racks of glasses and cups come out of the machine and go straight up to finish drying.
  2. The slanted surface lets rinse water run forward and off the shelf instead of pooling, so glassware dries faster and spots less.
  3. A 42 in. width holds full racks along the wall, and the 21-1/2 in. depth supports them completely front to back.
  4. Wall mounting keeps the storage footprint on the wall, leaving your tabletop and the floor beneath entirely clear.
  5. The tilted face keeps rack contents visible from below, so staff can sort and grab the right glass without unloading the rack.
  6. All stainless steel construction shrugs off water, detergent residue, and daily wipe-downs without rusting or chipping.

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$494.00
  • Hang it above the clean end of your dish line so racks of glasses and cups come out of the machine and go straight up to finish drying.
  • The slanted surface lets rinse water run forward and off the shelf instead of pooling, so glassware dries faster and spots less.
  • A 42 in. width holds full racks along the wall, and the 21-1/2 in. depth supports them completely front to back.
  • Wall mounting keeps the storage footprint on the wall, leaving your tabletop and the floor beneath entirely clear.
  • The tilted face keeps rack contents visible from below, so staff can sort and grab the right glass without unloading the rack.
  • See full feature list

    The CMA Dishmachines 12620.00 Stainless Steel Wall Shelf

    The CMA Dishmachines 12620.00 is a 42 in. wide slanted sorting shelf that mounts on the wall above your dish line and turns dead wall space into working rack storage. Freshly washed racks of glasses and cups slide onto the pitched surface, drain toward the front, and stay visible for sorting, all without claiming an inch of tabletop. It is a simple piece of stainless fabrication that solves a real bottleneck in busy dish rooms: where clean racks live while they finish drying.

    Slanted Design That Drains and Sorts

    The shelf face measures 42 in. wide by 21-1/2 in. deep and sits at a slant rather than lying flat. Pitch matters with glassware, because a rack of inverted glasses on a level shelf keeps rinse water trapped against every base, while on this slanted surface gravity pulls the water forward and off so racks air-dry noticeably faster. The angle also tips rack contents toward whoever is standing below, letting a bartender or server read the rack and pull the right glass without dragging the whole thing down. During a bar rush, that visibility is the difference between grabbing a wine glass in two seconds and unloading half a rack to find one.

    Wall-Mounted to Free Up Table and Floor Space

    Because it hangs on the wall instead of standing on legs, the 12620.00 adds storage without adding footprint. Mounting it above the clean end of your dishtable run puts rack storage exactly where racks exit the machine, so unloading becomes a single lift instead of a walk to a shelving unit across the room. There is nothing underneath to clean around either, which leaves the table and floor below completely open for work and for washdown. CMA shows this same 42 in. slant shelf paired with its clean-side dishtables, and the 21-1/2 in. depth gives full front-to-back support under standard dish racks.

    All Stainless Steel Construction

    CMA fabricates the shelf entirely from stainless steel, so constant contact with rinse water, detergent haze, and sanitizer mist will not corrode it. Stainless also wipes down in seconds at closing time, unlike painted or galvanized shelving that chips, streaks, and eventually rusts in a wet dish room. At 24 lb shipping weight the unit is light enough for a straightforward wall install, yet the all-metal build shoulders loaded glass racks shift after shift. Once it is anchored, you gain a permanent drying and sorting station that never needs more maintenance than a wipe.

    Features & Benefits

    1. Hang it above the clean end of your dish line so racks of glasses and cups come out of the machine and go straight up to finish drying.
    2. The slanted surface lets rinse water run forward and off the shelf instead of pooling, so glassware dries faster and spots less.
    3. A 42 in. width holds full racks along the wall, and the 21-1/2 in. depth supports them completely front to back.
    4. Wall mounting keeps the storage footprint on the wall, leaving your tabletop and the floor beneath entirely clear.
    5. The tilted face keeps rack contents visible from below, so staff can sort and grab the right glass without unloading the rack.
    6. All stainless steel construction shrugs off water, detergent residue, and daily wipe-downs without rusting or chipping.

    Specifications

    Overall Width42"
    Overall Depth21-1/2"
    Shelf StyleSlanted
    MountingWall mounted
    MaterialStainless steel
    Companion EquipmentClean Series dishtables
    Shipping Weight24 lb

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 1 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The CMA Dishmachines 12620.00 Stainless Steel Wall Shelf

    Product Features

    1. Hang it above the clean end of your dish line so racks of glasses and cups come out of the machine and go straight up to finish drying.
    2. The slanted surface lets rinse water run forward and off the shelf instead of pooling, so glassware dries faster and spots less.
    3. A 42 in. width holds full racks along the wall, and the 21-1/2 in. depth supports them completely front to back.
    4. Wall mounting keeps the storage footprint on the wall, leaving your tabletop and the floor beneath entirely clear.
    5. The tilted face keeps rack contents visible from below, so staff can sort and grab the right glass without unloading the rack.
    6. All stainless steel construction shrugs off water, detergent residue, and daily wipe-downs without rusting or chipping.

    Specifications

    Overall Width42"
    Overall Depth21-1/2"
    Shelf StyleSlanted
    MountingWall mounted
    MaterialStainless steel
    Companion EquipmentClean Series dishtables
    Shipping Weight24 lb

    Manufacturer's Warranty

      1 year

      Labor

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch