The CMA Dishmachines SR-U Soiled Dish Table
CMA Dishmachines positions the SR-U's pre-rinse sink at the right end of its 48 in. top, giving undercounter dishmachine installations a soiled-side station handed for the opposite wall. Where a door-type soiled table exists to feed racks sideways into a wash chamber, this undercounter format pairs with a machine that loads below counter level, so the tabletop stays a continuous work line. Your scraping, rinsing, and racking all happen on one stainless surface.
Made for Undercounter Dishmachine Setups
Within CMA's soiled series this is the undercounter model, a 48 in. wide by 29 in. deep top meant to run alongside an undercounter dishmachine instead of a full-height door-type hookup. Its sink occupies the right end, which frees the rest of the top for landing bus tubs and loading racks. Counting the 8 in. backsplash, overall height comes to 42-3/4 in., keeping the work surface at a comfortable counter level.
Deep Pre-Rinse Sink with Basket Drain
The 20 x 20 in. sink gives you 5 in. of depth, enough to scrape and rinse a stack of plates or a rack of glasses without water jumping the rim. An included scrap basket sits over the 2 in. basket drain, catching solids before they reach the drain line, and the 3-1/2 in. diameter die-formed mounted hole carries a smooth drawn radius instead of a sharp cut edge. When the closing crew is clearing the last tubs of the night, that basket is the difference between a quick rinse-out and a clogged line.
Drilled for a Splash-Mounted Pre-Rinse Unit
Factory holes punched 8 in. on center in the backsplash accept a splash-mounted pre-rinse unit, which is sold separately. That spares your installer from drilling stainless on site and centers the spray valve over the sink where the mess actually is. The 8 in. backsplash itself shields the wall from overspray, and its 3/4 in. rolled return stiffens the top edge.
16/304 Stainless Steel Top and Bracing
The top is 16-gauge type 304 stainless steel, a heavier build than the economy-gauge tops on light-duty tables, so daily bus tub traffic will not dent it. Raised rolled edges on the front and sides keep rinse water on the table rather than on the floor, while stainless steel channel and angle bracing underneath keeps the 48 in. span rigid. Tubular 1-5/8 in. O.D. stainless steel legs with adjustable side bracing let you level the table against adjacent counters and equipment.
Features & Benefits
-
Pair it with an undercounter dishmachine: the right-end sink handles scraping and pre-rinse while the rest of the 48 in. top stages tubs and racks.
-
A 20 x 20 in. pre-rinse sink with 5 in. of depth lets you scrape plates and rinse racks without splashing over the rim.
-
The included scrap basket sits over the 2 in. basket drain and stops solids before they can foul the drain line.
-
A 3-1/2 in. diameter die-formed mounted hole is pressed into the stainless with a smooth radius that wipes clean.
-
Backsplash holes punched 8 in. on center accept a splash-mounted pre-rinse unit, sold separately, with no field drilling.
-
The 8 in. high backsplash with a 3/4 in. rolled return protects the wall from overspray and stiffens the panel.
-
Raised rolled edges on the front and sides keep rinse water and spills on the table instead of on the floor.
-
A 16-gauge type 304 stainless steel top takes daily scraping, hot water, and detergents without denting or corroding.
-
Stainless steel channel and angle bracing under the top keeps the full 48 in. span rigid under loaded bus tubs.
-
Tubular 1-5/8 in. O.D. stainless steel legs with adjustable side bracing level the table against neighboring counters.
-
An included rack slide guides loaded dish racks smoothly across the tabletop.
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Pair it with an undercounter dishmachine: the right-end sink handles scraping and pre-rinse while the rest of the 48 in. top stages tubs and racks.
A 20 x 20 in. pre-rinse sink with 5 in. of depth lets you scrape plates and rinse racks without splashing over the rim.
The included scrap basket sits over the 2 in. basket drain and stops solids before they can foul the drain line.
A 3-1/2 in. diameter die-formed mounted hole is pressed into the stainless with a smooth radius that wipes clean.
Backsplash holes punched 8 in. on center accept a splash-mounted pre-rinse unit, sold separately, with no field drilling.
The CMA Dishmachines SR-U Soiled Dish Table
CMA Dishmachines positions the SR-U's pre-rinse sink at the right end of its 48 in. top, giving undercounter dishmachine installations a soiled-side station handed for the opposite wall. Where a door-type soiled table exists to feed racks sideways into a wash chamber, this undercounter format pairs with a machine that loads below counter level, so the tabletop stays a continuous work line. Your scraping, rinsing, and racking all happen on one stainless surface.
Made for Undercounter Dishmachine Setups
Within CMA's soiled series this is the undercounter model, a 48 in. wide by 29 in. deep top meant to run alongside an undercounter dishmachine instead of a full-height door-type hookup. Its sink occupies the right end, which frees the rest of the top for landing bus tubs and loading racks. Counting the 8 in. backsplash, overall height comes to 42-3/4 in., keeping the work surface at a comfortable counter level.
Deep Pre-Rinse Sink with Basket Drain
The 20 x 20 in. sink gives you 5 in. of depth, enough to scrape and rinse a stack of plates or a rack of glasses without water jumping the rim. An included scrap basket sits over the 2 in. basket drain, catching solids before they reach the drain line, and the 3-1/2 in. diameter die-formed mounted hole carries a smooth drawn radius instead of a sharp cut edge. When the closing crew is clearing the last tubs of the night, that basket is the difference between a quick rinse-out and a clogged line.
Drilled for a Splash-Mounted Pre-Rinse Unit
Factory holes punched 8 in. on center in the backsplash accept a splash-mounted pre-rinse unit, which is sold separately. That spares your installer from drilling stainless on site and centers the spray valve over the sink where the mess actually is. The 8 in. backsplash itself shields the wall from overspray, and its 3/4 in. rolled return stiffens the top edge.
16/304 Stainless Steel Top and Bracing
The top is 16-gauge type 304 stainless steel, a heavier build than the economy-gauge tops on light-duty tables, so daily bus tub traffic will not dent it. Raised rolled edges on the front and sides keep rinse water on the table rather than on the floor, while stainless steel channel and angle bracing underneath keeps the 48 in. span rigid. Tubular 1-5/8 in. O.D. stainless steel legs with adjustable side bracing let you level the table against adjacent counters and equipment.
Features & Benefits
-
Pair it with an undercounter dishmachine: the right-end sink handles scraping and pre-rinse while the rest of the 48 in. top stages tubs and racks.
-
A 20 x 20 in. pre-rinse sink with 5 in. of depth lets you scrape plates and rinse racks without splashing over the rim.
-
The included scrap basket sits over the 2 in. basket drain and stops solids before they can foul the drain line.
-
A 3-1/2 in. diameter die-formed mounted hole is pressed into the stainless with a smooth radius that wipes clean.
-
Backsplash holes punched 8 in. on center accept a splash-mounted pre-rinse unit, sold separately, with no field drilling.
-
The 8 in. high backsplash with a 3/4 in. rolled return protects the wall from overspray and stiffens the panel.
-
Raised rolled edges on the front and sides keep rinse water and spills on the table instead of on the floor.
-
A 16-gauge type 304 stainless steel top takes daily scraping, hot water, and detergents without denting or corroding.
-
Stainless steel channel and angle bracing under the top keeps the full 48 in. span rigid under loaded bus tubs.
-
Tubular 1-5/8 in. O.D. stainless steel legs with adjustable side bracing level the table against neighboring counters.
-
An included rack slide guides loaded dish racks smoothly across the tabletop.
Resources & Downloads
Specifications
| Overall Width | 48" |
| Overall Depth | 29" |
| Overall Height | 42-3/4" |
| Configuration | Undercounter |
| Sink Location | Right end |
| Backsplash Height | 8" |
| Backsplash Return | 3/4" rolled |
| Pre-Rinse Sink Size | 20" x 20" |
| Sink Depth | 5" |
| Drain | 2" basket drain |
| Die-Formed Mounted Hole | 3-1/2" diameter |
| Faucet Drilling | 8" OC, splash mount |
| Top Material | 16-gauge type 304 stainless steel |
| Edge Treatment | Raised rolled edges, front and sides |
| Legs | 1-5/8" O.D. tubular stainless steel |
| Bracing | Adjustable side, channel and angle |
| Included Accessories | Rack slide, scrap basket |
| Shipping Weight | 67 lb |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
Pair it with an undercounter dishmachine: the right-end sink handles scraping and pre-rinse while the rest of the 48 in. top stages tubs and racks.