IKON IPP71 71 In. Two-section Pizza Prep Table, (9) 1/3 GN Pans, R290, Self-Contained

The IKON IPP71 is a two-section pizza prep table with 22 cubic feet of refrigerated storage and a raised stainless steel pan rail that holds nine 1/3 GN portion control pans. The wider 71-inch body gives you room for a more complete topping spread across the pan rail and doubles the cabinet storage compared to the single-section model. Two solid hinged doors each open to their own adjustable epoxy-coated wire shelf, so you can organize proteins on one side and produce on the other without digging through a single compartment. The side-mounted R290 compressor holds 33 to 40 degrees Fahrenheit.

Refrigerated Raised Pan Rail with 1/3 x 4-Inch Portion Control Pans

The stainless steel raised pan rail runs the full width of the unit and keeps your toppings cold and accessible while you build pizzas. The included 1/3 GN portion control pans are four inches deep, so you can load a full prep batch of diced vegetables, shredded cheese, or sliced meats without refilling during a rush. A 17.7-inch removable polyethylene cutting board sits at the front of the pan rail for rolling, saucing, and topping work. When the board needs cleaning or replacing, it lifts straight out. If your menu calls for deeper topping wells, the unit can be custom-ordered with 6-inch portion control pans instead of the standard 4-inch size.

Self-Closing Doors with Tool-Free Magnetic Gaskets

Each door is self-closing and holds open at 90 degrees, so you can load or unload the cabinet with both hands without the door swinging back on you. The magnetic gaskets snap in and out without tools. When a gasket wears out or tears, you pull the old one off and press the new one into place in under a minute rather than scheduling a service call. Behind each door, one adjustable heavy-duty epoxy-coated wire shelf lets you set the spacing to fit your storage containers, dough trays, or backup ingredient pans. The electronic thermostat with a digital LED temperature display is readable at a glance from across the prep line, and automatic defrost keeps the evaporator clear without manual intervention.

Side-Mounted R290 Refrigeration with Auto Condensate Evaporation

The compressor mounts on the side of the cabinet where it pulls cooler ambient air rather than recirculating the heat trapped underneath a bottom-mount unit. R290 refrigerant paired with foam insulation holds the interior between 33 and 40 degrees Fahrenheit. The auto condensate evaporation system eliminates the need for a floor drain or drip pan emptying. The interior floor is 304 stainless steel for corrosion resistance in the wettest part of the cabinet, with aluminum back walls and ABS side walls and door backs. The exterior top, front, and sides are stainless steel. Four-inch casters with two front brakes let you roll the unit into position for cleaning and lock it down for daily service. Power runs on 115V/60/1 with a NEMA 5-15P plug and a 10-foot cord.

The IPP71 measures 70.8 inches wide by 32.3 inches deep by 41.7 inches high. The 1/2 HP compressor draws 5.0 amps on 115V/60/1 power. Shipping weight is 435 pounds.